LevelOne FCS-1030 user manual Basic Network Settings, Upgrade, Device Information

Page 20

Basic Network Settings

You can setup the network setting by this page. Usually this is no need to be changed, if you do change it please make sure you input the correct setting or the device may not be reachable.

Upgrade

When you select one device or multiple devices (of the same model), the “Upgrade” button will be enabled. Click on it to upgrade the firmware of the selected device(s). After click on the “Upgrade” button, Installation Wizard will try to connect the selected device(s). If the authentication is failed, it will popup a dialog to ask for the correct password and http port number.

Note: The default password is the MAC address with capital letter.

Device Information

After connected to the selected device, it will display.

- 12 -

Image 20

Contents LevelOne Table of Contents Smtp FTP Http Page Before You Use This Product Page Page Package Contents Installation Hardware installationSoftware installation Page Page Page Using Installation Wizard User InterfaceAction buttons Setup Function buttonsSystem Setting Change root passwordAdjust date and time Network Setting Fix the IP addressDevice Information Basic Network SettingsUpgrade Package Information File Selection How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Url http//Network Camera/protocol.html Administrator’s capability Fine-tuning for Best PerformanceOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersChange homepage layout More flexible options for viewersHow to change the background Page How to design my own homepage to replace the current one Page Demo on multiple sites mid-scale service Build a multimedia web attraction sitePage Image URL Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings GeneralFTP Streaming Ddns and UPnP settings Video codec parametersPage Page Motion detection Application settings Weekly scheduleSend out the snapshot while motion detection Sequential operationPage Homepage layout settings Viewing system parameters Factory defaultViewing system log Status LED TroubleshootingReset and restore Frequently asked questions Page Page URL commands of the Network Camera Capture update Snapshot of Jpeg imageQuery status of the digital input Drive the digital outputRestore factory default settings Restart systemURL System resource URLGeneral format of command URL System configuration URLSecurity configuration URL Network configuration URLCharacters Pasv2 Yes Access FTP server in passive mode Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URLPage Technical specifications Networking