LevelOne FCS-1030 user manual Installation, Hardware installation

Page 9

Installation

In this manual, "User" refers to whoever has access to the FCS-1030 Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera.

Hardware installation

Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length.

Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock.

Upon powering up, the device runs through a self-test procedure and the front LEDs will blink between green and red a few times. If self-test passes, the LED will be green and the Network Camera will standby for getting IP address. After getting IP Address, the LED will blink green every second. If self-test fails the red LED will blink several times. Refer to Appendix A for troubleshooting.

- 5 -

Image 9

Contents LevelOne Table of Contents Smtp FTP Http Page Before You Use This Product Page Page Package Contents Hardware installation InstallationSoftware installation Page Page Page User Interface Using Installation WizardAction buttons Function buttons SetupChange root password System SettingAdjust date and time Fix the IP address Network SettingBasic Network Settings UpgradeDevice Information Package Information File Selection Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilitySnapshot Digital ZoomClient settings Page Url http//Network Camera/protocol.html Fine-tuning for Best Performance Administrator’s capabilityOnly Quality Images Will Do Opening accounts for new users Protect Network Camera by passwordsMore flexible options for viewers Change homepage layoutHow to change the background Page How to design my own homepage to replace the current one Page Build a multimedia web attraction site Demo on multiple sites mid-scale servicePage Image URL Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings General Network settingsFTP Streaming Video codec parameters Ddns and UPnP settingsPage Page Motion detection Weekly schedule Application settingsSend out the snapshot while motion detection Sequential operationPage Homepage layout settings Factory default Viewing system logViewing system parameters Troubleshooting Reset and restoreStatus LED Frequently asked questions Page Page Capture update Snapshot of Jpeg image URL commands of the Network CameraQuery status of the digital input Drive the digital outputRestart system Restore factory default settingsSystem resource URL URLSystem configuration URL General format of command URLNetwork configuration URL Security configuration URLCharacters Pasv2 Yes Access FTP server in passive mode Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Homepage layout configuration URL Application configuration URLPage Networking Technical specifications