Ampeg SVP1600 manual Operation Mono Bridge Mode, Operation Dual Mono Mode, Cabinets

Page 6

SVP1600 Stereo Bass Power Amplifier

Operation: Mono Bridge Mode:

7

43565

15531SVP16009 SVP1600

 

 

(21)

SERIAL# BMCDN20083

 

Line: 120V Freq: 60

Pwr: 1.4kVA

 

 

 

 

IN

 

 

 

 

MONO

FROM PREAMP OR

 

 

 

BRIDGE

EFFECT'S OUTPUT

 

 

 

 

NOTE: THE SPEAKER CABINET(S) MUST BE ABLE TO HANDLE THE EXTREMELY HIGH POWER OUTPUT OF THE MONO BRIDGED AMPLIFIER

HIGH POWER CABINET(S)

4OHMS MINIMUM

Set the Stereo/Dual Mono / Mono Bridge switch to the Mono Bridgel position (switch in/depressed).

Connect a shielded signal cable from the Output of your Preamp or Effect to the Power Amp A Power Amp Input jack. Connect a speaker cable from the SVP1600’s Mono Bridge Speaker Output jack to the input jack(s) of the speaker(s).

NOTE: The Speakon® cable must be wired as follows: 1+ = hot, 2+ = return.

Operation: Dual Mono Mode:

7

43565

15531SVP16009 SVP1600

 

(21)

SERIAL# BMCDN20083

Line: 120V Freq: 60 Pwr: 1.4kVA

 

 

OUT

STEREO/

DUAL MONO

CABINET(S)

2 OHMS MINIMUM

CABINET(S)

2 OHMS MINIMUM

FROM PREAMP OR EFFECT'S OUTPUT

Set the Stereo/Dual Mono / Mono Bridge switch to the Stereo/Dual Mono position (switch out).

Connect a shielded signal cable from the Output of your Preamp or Effect to the Power Amp A Power Amp Input jack.

Connect a speaker cable from the SVP1600’s Power Amp A Speaker Output jack to the input jack(s) of one (set) of the speakers. Connect a speaker cable from the SVP1600’s Power Amp B Speaker Output jack to the input jack(s) of the other speaker(s).

NOTE: The Speakon® cable must be wired as follows: 1+ = hot, 1- = ground.

6

Image 6
Contents Usersr Guidei forf r thet Ampeg is Proudly Made in AmericaSVP1600 Stereo Bass Power Amplifier Features Front Panel Important This unit employs forced air cooling by meansSTEREO/DUAL Mono / Mono Bridge Use this switch to Rear PanelOperation Mono Bridge Mode Operation Dual Mono ModeCabinets Operation Stereo Mode System Block DiagramTechnical Specifications EMC

SVP1600 specifications

The Ampeg SVP1600 is a powerful and versatile bass amplifier that has gained recognition among musicians for its exceptional sound quality and robust features. Designed for professional use, the SVP1600 is a tube preamp with a solid-state power amp, providing the warmth and richness characteristic of tube sound while ensuring reliability and headroom typical of solid-state technology.

One of the key features of the SVP1600 is its all-tube preamp section, which utilizes high-quality 12AX7 tubes. This tube configuration results in a warm, dynamic tone that can enhance a bassist's playing experience. The preamp also offers a wide range of tonal shaping options, allowing players to dial in their desired sound easily. With controls for gain, treble, midrange, and bass, musicians can sculpt their tone to fit various styles and preferences.

Another prominent characteristic of the SVP1600 is its flexibility. The amplifier provides an impressive power output of 1,600 watts at 4 ohms, making it suitable for any gig, from small venues to large concert stages. It features a built-in crossover that allows for bi-amping, which enables players to separate high and low frequencies to different speaker cabinets for enhanced clarity and definition.

The SVP1600 also comes equipped with a balanced XLR output, allowing for easy direct connection to a mixing console or recording system. This feature is essential for live performances and studio recordings, ensuring that the warm tube sound is faithfully captured without any additional coloration.

Moreover, the amplifier's rugged construction ensures durability, making it a reliable choice for road use. The SVP1600 is designed with a front-mounted cooling system that helps prevent overheating during long gigs. The unit includes a protective grill and a heavy-duty frame, reinforcing its readiness for the rigors of touring musicians.

In terms of connectivity, the SVP1600 features multiple input options, including 1/4-inch jack and SpeakON outputs. This versatility enhances its compatibility with various speaker cabinets and setups, catering to different performance needs.

In summary, the Ampeg SVP1600 is an impressive bass amplifier that combines the warmth of a tube preamp with the power and reliability of solid-state technology. With its user-friendly controls, robust power output, and versatile connectivity options, it stands out as an essential tool for professional bassists seeking to achieve their ideal sound on stage or in the studio. Whether playing rock, jazz, or anything in between, the SVP1600 delivers the performance that musicians demand.