LOREX Technology SHS-4QM2 instruction manual Connecting Cameras

Page 15

Camera Installation

Connecting Cameras

1. Connect the female end of the supplied 60’ extension’ cable to the camera.

NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function.

2.Connect the male end of the supplied 60’ extension cable to an open DIN channel on the back of the SHS-4QM2. Continue connecting additional DIN cameras.

NOTE: The arrow on the DIN Camera should be facing up when connecting the DIN Extension Cable to the SHS-4QM2.

15

Image 15
Contents Camera Video Surveillance System with Multi Camera Viewing Page Installation Important SafeguardsService Lorex Technology INC General PrecautionsSHS-4QM2 Features Table of Contents Getting Started Channel 2 / Down Button LED IndicatorsSHS-4QM2 Front View Channel 1 / UP ButtonChannel 4 / Right Button Quad / Menu / ESC ButtonFreeze / Autoscan Button SHS-4QM2 Rear View Remote Control Camera Lens Stand SHS-4QM2 CamerasCamera Installation Installation WarningsCamera Stand Installation Connecting Cameras TV / VCR / Monitor Connecting the SHS-4QM2 Video CableConnectivity Diagram PowerSystem Setup Menu SetupSystem Setup Setup Menu SetupAuto Sequence Display SetupDisplay Setup Auto SequenceMotion Setup Camera Camera SetupMotion Setup Camera SetupEvent Report Event SetupEvent Report SHS-4QM2 System Specifications Appendix #1 Control Box SpecificationsCamera Specifications It’s all on the web