CONNECTING CAMERA TO A TV
1.Mount the camera to the ceiling.
2.Connect the video extension cable (not included) from the camera to the TV (AV input of the TV).
3.Connect the power extension cable (not included) to the supplied camera’s power 12V DC adaptor.
4.Attach the supplied 12V DC power supply to the power extension cable (not included) and plug into an electrical outlet.
5.Select the AV channel (AUX or Video channel) in your television to view camera. (Note: consult your television owners manual for setting the TV to auxiliary or video mode.)
6.Adjust the camera to the desired viewing angle.
TROUBLE SHOOTING:
If the camera does not function properly, check the following points. If you continue to have problems, please call our Toll Free Customer Support line for assistance.
PROBLEMS | CAUSE AND REMEDIES |
|
|
NO PICTURE | DC ADAPTOR NOT PLUGGED IN |
| MONITOR NOT TURNED TO CORRECT |
| MODE OR CHANNEL |
POOR PICTURE QUALITY | CLEAN THE CAMERA LENS |
| ADJUST THE CONTRAST OR BRIGHTNESS CONTROL |
| OF YOUR MONITOR |
FOR MORE INFORMATION
OR TO SEE THE COMPLETE RANGE OF LOREX PRODUCTS
PLEASE VISIT OUR WEBSITE:
WWW.STRATEGICVISTA.COM
TECHNICAL SPECIFICATIONS |
|
| |
|
|
Image Sensor | ¼” CCD Color |
Pixels | 510 x 492 |
Scanning System | Internal Sync |
Resolution | 330 lines |
Min Illumination | 1.0 lux |
S/N Ratio | More than 48 db |
White Balance | Auto |
Electronic Shutter | 1/60 – 1/100,000 sec |
Lens | Varifocal |
Power Consumption | 12 V DC, 160mA |
Operational Temp. | |
Dimensions | 4 7/8” Dia x 3 ½” H |
Weight | 17.6 oz |
|
|
ALWAYS USE DISCRETION WHEN INSTALLING VIDEO AND/OR AUDIO SURVEILLANCE EQUIPMENT WHEN THERE IS PERCEIVED PRIVACY. INQUIRE REGARDING FEDERAL, STATE AND/OR LOCAL REGULATIONS APPLICABLE TO THE LAWFUL INSTALLATION OF VIDEO AND OR AUDIO RECORDING OR SURVEILLANCE. PARTY CONSENT MAY BE REQUIRED.
BECAUSE OUR PRODUCTS ARE SUBJECT TO CONTINUOUS IMPROVEMEMT, SVC RESERVES THE RIGHT TO MAKE PRODUCT MODIFICATION
WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION. E&OE