ES42 Series Edge Switches | Installation and User Guide (05/05) |
1.
2.The Alarm Relay contact connected to the two terminals (1,2) is hardware operated.
3.By default it is NC (normally closed). It will open if there is any loss of power to the electronics inside of the unit.
5.0TROUBLESHOOTING
All Magnum Ethernet products are designed to provide reliability and
consistently high performance in all network environments. The installation of Magnum ES42 Series 10/100 Mb/s Switches is a straightforward procedure (see INSTALLATION, Section 3.0); the operation is also straightforward and is discussed in Section 4.
Should problems develop during installation or operation, this section is intended to help locate, identify and correct these types of problems. Please follow the suggestions listed below prior to contacting your supplier. However, if you are unsure of the
www . GarrettCom. com
62