Lens Installation
Lens Installation
The lens on the Camera can be changed to one of the following types:
Installing C-MOUNT LENS
1.Removing the Protection Cap
2.Screw the new lens onto the camera by turning clockwise.
Protection Cap
Installing CS-MOUNT LENS
1.Remove the Protection Cap and
2.Screw the lens onto the camera by turning clockwise.
Installing AUTO IRIS LENS
1.Removing the Protection Cap.
2.Screw the lens onto the camera by turning clockwise.
3.Connect the Auto Iris Lens Power Cable to the Auto Iris Lens Connector on the rear of the camera.
4.Set the DC/VIDEO Selection Switch to either “DC” or “VIDEO” (depending on the type of lens). Set the EE/AI Selection Switch to AI when using an Auto Iris Lens.
Auto Iris Lens Power Connector
Lens Switches
v