Connecting The Camera
Powering Multiple Receivers Using The Power Splitter Cable (LW2110PK2 only)
The power splitter cable allows you to connect two receivers to one power adapter.
To connect the power splitter cable to the receivers:
1Connect the power adapter to the power splitter cable (see Figure A below).
2Connect the ends of the power splitter cable to each of the receivers.
3Connect the power adapter to a 120V power outlet.
Power Adapter
Power Outlet
Splitter cable
Figure A
On-Screen Display
Signal Indicator
Status Indicator
1Signal Indicator:The signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal.
One or no bars indicates the signal is poor. Four bars indicate a very strong signal.
2Status Indicator: The status indicator message "Connecting" appears when the receiver is trying to locate a camera.
ATTENTION:If the signal is low (e.g. 1 or 2 bars) adjust the antennas, or reposition the camera or receiver to improve signal strength.
7