Linksys PVC2300 manual Reset Button

Page 9

Installation

D. The Wizard will now search for your camera..

Once found highlight the camera and click Next..

If the Camera you want is not displayed in the Selection box, click Search Again..

NOTE: The Camera defaults to DHCP mode.. If your network doesn’t have a DHCP server or if you are having issues obtaining an IP address, you can assign a static IP address to the Camera by pressing the reset button for less than 3 seconds.. A static IP address of 192.168.1.99 will be assigned to the Camera..

Reset Button

WARNING: Pressing the reset button for 10 seconds will restore the factory default settings, including setting the Camera to DHCP mode..



Image 9
Contents Business Internet Video Camera with Audio Page Table of Contents Minimum System Requirements for 1 camera Minimum RequirementsInstallation Installation Installation Configuration Reset Button Installation Timer will appear as the settings are saved to the Camera Click Install ActiveX Control Installation is complete Optional Lenses Adjusting the LensPage Hour Technical Support