Vivotek IP3136 manual

Page 16

lower the security level or contact your IT or networking supervisor.

There are two settings for the client side. One is “Media Option” for users to determine if audio should be muted. The other is “Protocol Option” which allows choices on connection protocol between client and server. There are three protocols choices to optimize your usage - UDP, TCP and HTTP.

The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to network burst traffic and images may be obscured.

The TCP protocol allows for less packet loss and produces a more accurate video display. The downside with this protocol is that the real-time effect is worse than that with the UDP protocol.

The HTTP protocol must be selected if the network is protected by a firewall and it only allows HTTP Port (80) to be opened. In this mode, audio will not be sent and only video is operational. If no special need is required, UDP protocol is recommended. Generally speaking, the client’s choice will be in the order of UDP → TCP → HTTP. After the Network Camera is connected successfully, “Protocol Option” will indicate the selected protocol. The selected protocol will be recorded in the user's PC and will be used for the next connection. If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol, save, and return HOME

- 14 -

www.vivotek.com

Image 16

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Smtp FTP 886-2-82455282 886-2-82455532 Package Contents Installation Hardware installationSoftware installation To install in EthernetCheck Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom Client settings SnapshotPage To re-connect Administrator’s capability Fine-tuning for Best PerformanceOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersChange homepage layout How to change the font color Page Page Page How to design my own homepage to replace the current one Page Demo on multiple sites mid-scale service Build a multimedia web attraction sitePage Image URL Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings General Network settingsStreaming Wlan Configuration Page Mail & FTP SmtpPage Ddns and UPnP settings Video codec parametersPage Page Motion detection Application settings Weekly scheduleSend out the snapshot while motion detection Sequential operationPage Homepage layout settings Viewing system log Factory defaultViewing system parameters Reset and restore TroubleshootingStatus LED Frequently asked questions Page Page URL commands of the Network Camera Capture update Snapshot of Jpeg imageRestore factory default settings Restart systemURL System resource URLGeneral format of command URL System configuration URLSecurity configuration URL Network configuration URLSsid Ddns & UPnP configuration URL Mail & FTP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URL Technical specifications NetworkingElectromagnetic Compatibility EMC Liability