Vivotek IP3136 manual Administrator’s capability, Fine-tuning for Best Performance

Page 18

Administrator’s capability

Fine-tuning for Best Performance

Best performance generally equates to the fastest image refresh rate with the best video quality, and at the lowest network bandwidth as possible. The three factors, “Maximum frame rate”, “Fix bit rate”, and “Fix quality” on the Video Configuration page, are correlative to allow for achieving the best performance possible.

For Best Real-time Video Images

To achieve good real-time visual effect, the network bandwidth should be large enough to allow a transmission rate of greater than 20 image frames per second. If the broadband network is over 1 Mbps, set the “Fix bit rate” to 1000Kbps or 1200Kbps, and set “Fix quality” at the highest quality. The maximum frame rate is 30. If your network bandwidth is more than 384Kbps, you can fix the bit rate according to your bandwidth

- 16 -

www.vivotek.com

Image 18
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Smtp FTP 886-2-82455282 886-2-82455532 Package Contents Installation Hardware installationSoftware installation To install in EthernetInitial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom Client settings SnapshotPage To re-connect Administrator’s capability Fine-tuning for Best PerformanceOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersChange homepage layout How to change the font color Page Page Page How to design my own homepage to replace the current one Page Demo on multiple sites mid-scale service Build a multimedia web attraction sitePage Image URL Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings GeneralStreaming Wlan Configuration Page Mail & FTP SmtpPage Ddns and UPnP settings Video codec parametersPage Page Motion detection Send out the snapshot while motion detection Application settingsWeekly schedule Sequential operationPage Homepage layout settings Factory default Viewing system logViewing system parameters Troubleshooting Reset and restoreStatus LED Frequently asked questions Page Page Restore factory default settings URL commands of the Network CameraCapture update Snapshot of Jpeg image Restart systemURL System resource URLGeneral format of command URL System configuration URLSecurity configuration URL Network configuration URLSsid Ddns & UPnP configuration URL Mail & FTP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URL Technical specifications NetworkingElectromagnetic Compatibility EMC Liability