Vivotek ip7135 manual Client settings

Page 15

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Client settings

At the initial access to the “Connection type” page in Windows, the web browser will ask for a new plug-in installation, the plug-in being the Network Camera. This plug-in has been registered for certification and can be used to change the parameters at the

client’s site. The user may click on to install the plug-in. If the web browser does not allow the user to complete the installation, check the Internet security to lower the security level or contact your IT or networking supervisor.

There are two settings for the client side. One is “Media Options” for users to determine the type of media to be streaming. The other is “Protocol Options” which allows choices on connection protocol between client and server. There are two protocols choices to optimize your usage – UDP and TCP.

The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to network burst traffic and images may be obscured.

The TCP protocol allows for less packet loss and produces a more accurate video display. The downside with this protocol is that the real-time effect is worse than that with the UDP protocol.

User's Manual - 15

Image 15

Contents 3GPP/ISMA IP7135 Technical@vivotek.com Sales@vivotek.com Before You Use This Product Table of Contents FTP Package Contents Hardware installation InstallationSoftware installation Initial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityDigital Zoom Snapshot Client settings Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpDdns Access List Key frame interval Video SettingsAudio and Video GeneralVideo orientation Audio settingsImage Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Send out the snapshot while motion detection Application settingsWeekly schedule Snapshot file name prefixMethod for sending snapshot Sequential operationPage Page System log Viewing system parameters Maintenance Status LED TroubleshootingURL commands of the Network Camera Reset and restoreMethod GET/POST Get server parameter valuesReturn Set server parameter valuesHhmmss WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/ddGroup Security Skip to invoke default serverBlank 192.168.0.99255.255.255.0 Shorter Live.sdp 5545558 5556For 60Hz only 640x480 ForComputer 51200012200 AAC4 for computerGamr for mobile 128000Blank Script.vssx Application page CGI command IP address514 Maxsize PrefixappindexAccount management Capture single snapshotSystem logs Upgrade firmware Configuration fileTechnical specifications MPEG-4 AAC Technology MPEG-4 Visual Technology Technology License NoticeElectromagnetic Compatibility EMC

Related manuals

Manual 67 pages 3.89 Kb