Vivotek ip7135 manual Software revision upgrade

Page 21

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Software revision upgrade

Customers can obtain the up-to-date software from the web site of VIVOTEK. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

1.Download the firmware file named “xxx.pkg” from the appropriate product folder.

2.Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the Upgrade Wizard for details.

3.Or upgrade firmware from HTTP web page directly

3.The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network Camera cannot restart properly, ask your dealer for technical service.

User's Manual - 21

Image 21
Contents 3GPP/ISMA IP7135 Technical@vivotek.com Sales@vivotek.com Before You Use This Product Table of Contents FTP Package Contents Hardware installation InstallationSoftware installation Initial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityDigital Zoom Snapshot Client settings Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming HttpDdns Access List Audio and Video Video SettingsGeneral Key frame intervalVideo orientation Audio settingsImage Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Weekly schedule Application settingsSnapshot file name prefix Send out the snapshot while motion detectionMethod for sending snapshot Sequential operationPage Page System log Viewing system parameters Maintenance URL commands of the Network Camera TroubleshootingReset and restore Status LEDMethod GET/POST Get server parameter valuesReturn Set server parameter valuesAvailable parameters on the server WirelessNetwork CameraYyyy/mm/dd HhmmssGroup Security Skip to invoke default serverBlank 192.168.0.99255.255.255.0 Shorter 5558 5545556 Live.sdpComputer 640x480 For512000 For 60Hz onlyGamr for mobile AAC4 for computer128000 12200Blank Script.vssx Application page CGI command IP address514 Maxsize PrefixappindexAccount management Capture single snapshotSystem logs Upgrade firmware Configuration fileTechnical specifications MPEG-4 AAC Technology MPEG-4 Visual Technology Technology License NoticeElectromagnetic Compatibility EMC
Related manuals
Manual 67 pages 3.89 Kb