Vivotek IP7131 manual Initial Access to the Network Camera, Check Network Settings

Page 10

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Once installation is complete, the Administrator should proceed to the next section "Initial access to the Network Camera" for necessary checks and configurations.

Initial Access to the Network Camera

Check Network Settings

The Network Camera can be connected either before or immediately after software installation onto the Local Area Network. The Administrator should complete the network settings on the configuration page, including the correct subnet mask and IP address of gateway and DNS. Ask your network administrator or Internet service provider for the detail information. By default the Network Camera requires the Administrator to run installation every time it reboots. If the network settings are to remain unchanged, disable the Install option. Refer to “Network settings” on the System Configuration page for details. If any setting is entered incorrectly and cannot proceed to setting up the Network Camera, restore the factory settings following the steps in the “Troubleshooting” chapter of the Appendix.

Add Password to prevent Unauthorized Access

The default Administrator’s password is blank and the Network Camera initially will not ask for any password. The Administrator should immediately implement a new password as a matter of prudent security practice. Once the Administrator’s password is saved, the Network Camera will ask for the user’s name and password before each access. The Administrator can set up a maximum of twenty (20) user accounts. Each user can access the Network Camera except to perform system configuration. Some critical functions are exclusive for the Administrator, such as system configuration, user administration, and software upgrades. The user name for the Administrator is permanently assigned as “root”. Once the password is changed, the browser will display an authentication window to ask for the new password. Once the password

is set, there is no provision to recover the Administrator’s password. The

- 9 -

www.vivotek.com

9 - User's Manual

Image 10
Contents IP Surveillance Sales@vivotek.com Before You Use This Product Table of Contents FTP CD. Technical specifications Package Contents Installation Hardware installationSoftware installation Check Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom SnapshotClient settings Page Digital output Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration Page System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingUrl http//Network Camera/setup/network.html Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings ApplicationDigital input Weekly scheduleSnapshot file name prefix Send out the snapshot while motion detectionSequential operation Method for sending snapshot410 Video clip max file size Video clipVideo clip file name prefix Send out the video clip while motion detectionSequential operation Page Trigger digital output while motion detection Page System log Viewing system parameters Maintenance Reset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Set server parameter values Parameter pairReturn Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank192.168.0.99 Blank255.255.255.0 Smtp2 Domain Name Secondary Smtp server Address String 5556 5545558 Live.sdp640x480 For 256176x144 for mobile ComputerFor 60Hz only AAC4 for computer128000 Gamr for mobile12200 Enable motion window #1 Script.vssx IP address Application page CGI command514 Capture single snapshot SsprefixAccount management System logs Privilege=confConfiguration file Upgrade firmwarePost data CD. Technical specifications TechnologyLicenseNoticeNotice Mpegamr Technology-4 AAC TechnologyElectromagnetic Compatibility EMC
Related manuals
Manual 73 pages 27.8 Kb