Vivotek IP7131 manual Software revision upgrade

Page 23

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Software revision upgrade

Customers can obtain the up-to-date software from the web site of Vivotek. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

1.Download the firmware file named “xxx.pkg” from the appropriate product folder.

2.Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the Upgrade Wizard for details.

3.Or upgrade firmware from HTTP web page directly

3.The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network Camera cannot restart properly, ask your dealer for technical service.

- 22 -

www.vivotek.com

User's Manual - 22

Image 23

Contents IP Surveillance Sales@vivotek.com Before You Use This Product Table of Contents FTP CD. Technical specifications Package Contents Hardware installation InstallationSoftware installation Add Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilitySnapshot Digital ZoomClient settings Page Digital output Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration Page System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpUrl http//Network Camera/setup/network.html Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application Application settingsSend out the snapshot while motion detection Weekly scheduleSnapshot file name prefix Digital inputMethod for sending snapshot Sequential operation410 Send out the video clip while motion detection Video clipVideo clip file name prefix Video clip max file sizeSequential operation Page Trigger digital output while motion detection Page System log Viewing system parameters Maintenance Status LED TroubleshootingReset and restore Method GET/POST URL commands of the Network CameraGet server parameter values Parameter pair Set server parameter valuesReturn Yyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group Security255.255.255.0 Blank192.168.0.99 Smtp2 Domain Name Secondary Smtp server Address String Live.sdp 5545558 5556Computer 256176x144 for mobile 640x480 ForAAC4 for computer For 60Hz only12200 Gamr for mobile128000 Enable motion window #1 Script.vssx 514 Application page CGI commandIP address Ssprefix Capture single snapshotAccount management Privilege=conf System logsUpgrade firmware Configuration filePost data CD. Technical specifications Mpegamr Technology-4 AAC Technology TechnologyLicenseNoticeNoticeElectromagnetic Compatibility EMC

Related manuals

Manual 73 pages 27.8 Kb