Trango Broadband PTZ-900 operating instructions Quick-Start Guide, PTZE.p65

Page 2

M-PTZ_E.p65

All rights reserved.

© 2002 Trango Systems, Inc.

15070 Avenue of Science, Suite 200

San Diego, California 92128

+1 858-653-3900

techsupport@trangosys.com

www.trangosys.com

.

Do not apply power to the transmitter unless the antenna is con- nected. Permanent damage to the unit may result.

The PTZ-900TXtransmitter’s effective radiated output varies between 0.5 and 4 watts, depending on the transmit antenna used. Although transmissions are of a short duration, it is rec- ommended that the transmit antenna be kept at least three feet away from nearby people. Important note to installer: This warn-

ing is for FCC exposure requirements.

Quick-Start Guide

1Prior to installing the wireless link, verify proper operation of PTZ controller (keyboard) and hard-wired receiver/driver or dome.

2Determine the bit rate and interface (RS232 or RS485/422) of the hard-wired system. If it is not 9600 bps and RS485/422, you will need either to change the setting of the PTZ controller and receiver/driver or to change the settings of the PTZ-900 equipment. See the end of this manual for information on changing PTZ-900 internal settings using TrangoLink software.

3Wire the terminal block with shielded twisted-pair cable as shown on pages 8 and 9.

4After making the necessary adjustments to the internal settings and cables, connect the system as shown on page 4 and test the wireless link at short range to verify operation before installing permanently.

5Install PTZ-900 transmitter and receiver units in desired locations

to 23/8diameter steel pole and oriented as shown on page 3. The pole must be securely mounted so that it does not move.

6Install antennas above the enclosures and position as shown on page 3. Important! The PTZ-900TX(transmitter) uses a special antenna con- nector. Use only the AD900-9-P or the AO900-3-P antenna, otherwise damage to the unit may occur.

Use extreme care when installing antennas near power lines. You can be killed if the antenna comes in contact with the power line.

7Fasten the antenna cables to receiver and transmitter only finger- tight (no more than 8 lb/in. of torque). Tighten flange around cables. Apply a small amount of silicone to the flange openings to make a leakproof connection.

8Connect shielded twisted-pair interface cables to units through flanges. Tighten flanges. Important! Power adapter must be kept dry.

9Verify that LED is illuminated, then tighten down the enclosure’s lid

PTZ-900 Installation and Operating Instructions

rev E

Trango Systems, Inc.

3

Image 2
Contents PTZ-900 Quick-Start Guide PTZE.p65FCC Information ServiceYour Trango PTZ-900 System System DescriptionMultilink Operation InstallationPoint-to-Multipoint Operation Transmitter Operation TrangoLink Software With the PTZ-900 System PC Requirements & InstallationReceiver Operation Troubleshooting Interference or intermittent operationPTZ-900TXTransmitter Electrical Parametric SpecificationsData not received PTZ-900TXTransmitter Mechanical & EnvironmentalPTZ-900RXReceiver Electrical PTZ-900RXReceiver Mechanical & Environmental

PTZ-900 specifications

The Trango Broadband PTZ-900 is an advanced outdoor PTZ (pan-tilt-zoom) camera designed to cater to a wide range of surveillance needs across various applications. This exceptional device combines cutting-edge technology with rugged durability, making it suitable for both urban and rural environments. With its impressive range of features, the PTZ-900 stands out in the market for its reliability and performance.

One of the primary features of the PTZ-900 is its high-definition video resolution, which ensures crystal-clear images and sharp details. This camera supports up to 1080p HD resolution, allowing users to capture high-quality footage even in challenging lighting conditions. The integrated low-light technology enhances visibility in dim environments, making it an ideal choice for night surveillance.

The PTZ-900 is equipped with a powerful optical zoom capability, allowing users to zoom in on distant subjects without losing image quality. With a zoom ratio of up to 30x, this camera can track moving objects with precision and provide a closer look when necessary. The smooth pan and tilt movement allows for a wide coverage area, ensuring that no blind spots are left unmonitored.

In terms of connectivity, the PTZ-900 supports various protocols, including ONVIF and RTSP, making it compatible with a range of video management systems. This flexibility allows for seamless integration into existing security setups, facilitating easy management and monitoring. Additionally, the camera supports both wireless and wired network connections, providing installers with the option to choose the most suitable installation method.

The design of the PTZ-900 is rugged and weather-resistant, with an IP66 rating that protects it from dust and water ingress. This durability means that the camera can withstand harsh environmental conditions, from heavy rain to extreme temperatures, ensuring continuous operation in outdoor settings.

Another significant characteristic of the PTZ-900 is its intelligent video analytics capabilities. The camera can perform functions such as motion detection and line crossing detection, which significantly enhances the efficiency of surveillance operations. Alerts can be configured to notify users of any unusual activity, allowing for timely responses to potential security threats.

Overall, the Trango Broadband PTZ-900 is a robust, feature-rich PTZ camera that delivers high-quality surveillance capabilities. Its advanced technologies and versatile application make it a reliable choice for organizations looking to enhance their security measures with an effective and dependable camera system. Whether for commercial or residential use, the PTZ-900 is an investment in safety and peace of mind.