Trango Broadband PTZ-900 Installation, Point-to-Multipoint Operation, Multilink Operation

Page 4

Installation

Make sure that you have tested the PTZ controller and receiver/driver/ dome using a direct connection (with wires) before installing the wire- less link. Also, it is recommended that the wireless link be tested at short range before installing permanently. The transmitter and receiver units may get warm to the touch. This is normal and does not affect operation in any way.

The PTZ-900 system is factory-configured for operation at 9600 bps, RS-485/422 mode, hopping sequence 0, address 0000. If your PTZ con- troller and dome operate at a speed other than 9600 bps or use RS-232 protocol, you must reprogram the PTZ-900TXand PTZ-900RXusing the supplied programming cable and the TrangoLink software, which runs on any computer with Windows 95 or higher. See page 11 for detailed information.

Important! The PTZ-900 enclosures are designed for a steel pole with a maximum diameter of 23/8and a wall thickness of ¼. The pole must be securely mounted into the ground or to a structure to prevent move- ment of the antenna and camera in windy conditions. This pole also acts as an earth ground and must be grounded.

Point-to-Multipoint Operation

In some cases it may be necessary to control more than one camera from the same console. In this case, one PTZ-900TXtransmitter can be used to send control signals to all receivers and the receiver/drivers will filter the data as in a hard-wired system. The user must ensure that all PTZ-900RXreceivers have the same address and hopping sequence as the transmitter. Mount any antenna receiving from an AO900-3-P omnidirectional in the vertically polarized position.

To obtain the best performance and transmission distance, the follow- ing rules of thumb should be followed:

1

Mount the transmitter and receiver antennas above human and me-

 

chanical traffic, the higher the better. A ten-foot steel mast on top

 

of a building is typical. Make sure that the mast is well grounded to

 

earth ground with a wire of AWG 8 or greater. For distances more

 

than eight miles, the transmit and receive antennas must be fifteen

 

to twenty feet above all obstacles in the line of sight.

2

Keep the transmission path as open as possible. Objects such as walls

 

and metallic objects near the transmission path may reduce the

 

transmission distance.

3

Do not add additional lengths of cable to connect the receiver to the

 

antenna, as significant losses in signal and reduced transmission

AO 900-3-P omni antenna

PTZ-900TX

Channel 1

 

PTZ CONSOLE

FALCON or EAGLE

RX for video

 

Channel 3

 

MULTIPLEXER

 

Channel 5

 

Channel 7

EVENT RECORDER

MONITOR

FALCON or EAGLE TX for video

PTZ- 900RX

DOME or

RECEIVER DRIVER

range will occur.

4 Keep the data link (shielded twisted-pair) cables as short as possible

to prevent distortion of the data and possible interference with video

running on coaxial cable nearby.

The PTZ-900 system transmitter and receiver units come pre-mounted in a NEMA 4× aluminum enclosure. This permits the unit to be mounted outdoors.

Multilink Operation

Different than point-to-multipoint operation. multilink is where more than one transmitter is operating in the same area. In this case, all the transmitters and receivers operating on one system would have the same hopping sequence and address. Those on another system nearby should have a different address and a different hopping sequence in order to add more isolation between the systems

6

PTZ-900 Installation and Operating Instructions

rev E

Trango Systems, Inc.

7

Image 4
Contents PTZ-900 Quick-Start Guide PTZE.p65Service Your Trango PTZ-900 SystemFCC Information System DescriptionPoint-to-Multipoint Operation InstallationMultilink Operation Transmitter Operation Receiver Operation PC Requirements & InstallationTrangoLink Software With the PTZ-900 System Troubleshooting Interference or intermittent operationParametric Specifications Data not receivedPTZ-900TXTransmitter Electrical PTZ-900TXTransmitter Mechanical & EnvironmentalPTZ-900RXReceiver Electrical PTZ-900RXReceiver Mechanical & Environmental

PTZ-900 specifications

The Trango Broadband PTZ-900 is an advanced outdoor PTZ (pan-tilt-zoom) camera designed to cater to a wide range of surveillance needs across various applications. This exceptional device combines cutting-edge technology with rugged durability, making it suitable for both urban and rural environments. With its impressive range of features, the PTZ-900 stands out in the market for its reliability and performance.

One of the primary features of the PTZ-900 is its high-definition video resolution, which ensures crystal-clear images and sharp details. This camera supports up to 1080p HD resolution, allowing users to capture high-quality footage even in challenging lighting conditions. The integrated low-light technology enhances visibility in dim environments, making it an ideal choice for night surveillance.

The PTZ-900 is equipped with a powerful optical zoom capability, allowing users to zoom in on distant subjects without losing image quality. With a zoom ratio of up to 30x, this camera can track moving objects with precision and provide a closer look when necessary. The smooth pan and tilt movement allows for a wide coverage area, ensuring that no blind spots are left unmonitored.

In terms of connectivity, the PTZ-900 supports various protocols, including ONVIF and RTSP, making it compatible with a range of video management systems. This flexibility allows for seamless integration into existing security setups, facilitating easy management and monitoring. Additionally, the camera supports both wireless and wired network connections, providing installers with the option to choose the most suitable installation method.

The design of the PTZ-900 is rugged and weather-resistant, with an IP66 rating that protects it from dust and water ingress. This durability means that the camera can withstand harsh environmental conditions, from heavy rain to extreme temperatures, ensuring continuous operation in outdoor settings.

Another significant characteristic of the PTZ-900 is its intelligent video analytics capabilities. The camera can perform functions such as motion detection and line crossing detection, which significantly enhances the efficiency of surveillance operations. Alerts can be configured to notify users of any unusual activity, allowing for timely responses to potential security threats.

Overall, the Trango Broadband PTZ-900 is a robust, feature-rich PTZ camera that delivers high-quality surveillance capabilities. Its advanced technologies and versatile application make it a reliable choice for organizations looking to enhance their security measures with an effective and dependable camera system. Whether for commercial or residential use, the PTZ-900 is an investment in safety and peace of mind.