![Headset base and handset lifter installation](/images/new-backgrounds/13675/1367529x1.webp)
Headset base and handset lifter installation
No lifter mode or lifter mode
There are two answer modes available on the headset base. The current mode is indicated
by the NO LIFTER MODE or LIFTER MODE lights on the front of the headset base.
•When plugging your headset base into the telephone wall jack, make sure the headset
base mode is set to NO LIFTER MODE.
MODE |
•When connecting your headset base to a corded telephone, make sure the headset base mode is set to LIFTER MODE and that the LIFTER AUDIO ADJUST is switched for the best headset audio quality.
To change the answer mode:
When the headset is not in use, press MODE on the headset base to select NO LIFTER MODE or LIFTER MODE. The corresponding light on the front of the headset base turns on to indicate the current mode.
NOTE: If you are using the handset lifter, you must use the LIFTER MODE.
13