AT&T TL7612 Installation of large lifter pad optional, Installation of anti-slippad optional

Headset base and handset lifter installation

Installation of large lifter pad (optional)

If the small lifter pad cannot hold the corded handset steadily, you can attach a large lifter pad (provided) to enlarge the contact area.

1.Hold the large lifter pad in front of the small lifter pad as shown below.

2.Insert the large lifter pad into the two front gaps of the small lifter pad.

Installation of anti-slip pad (optional)

The anti-slip pad (provided) helps prevent your corded handset from slipping from the lifter.

1.Choose an appropriate position for the anti-slip pad above the small lifter pad.

2.Peel off the protective strip from the anti-slip pad.

3.Carefully stick the anti-slip pad to your chosen position. You may now place the corded handset back onto the lifter.

Adhesive tape

Protective strip

21