Headset base and handset lifter installation
Lifter adjustments and testing
1. Make sure that the headset base is set to LIFTER MODE and that the
LIFTER AUDIO ADJUST setting is correct.
2. Turn the switch hook presser adjustment knob until the switch hook presser is just above the switch hook.
3. Lower the lifter arm until the switch hook presser holds the switch hook down.
4.Place the corded handset on the lifter.
5.Press ON/OFF on the headset. The switch
hook presser should rise and release the switch hook on your telephone base. Make sure you hear a dial tone through your headset earpiece.
6.If the switch hook is not fully released, turn the ADJUST LIFTER knob while the corded handset is on the lifter. When the switch
hook is fully released, you will hear a dial tone from the headset.
It may take some adjustments and testing to find the right position for the lifter. For the lifter to work properly, the switch hook must release completely when you press ON/OFF to turn the headset on. The switch hook must also be held down completely when you press ON/OFF to turn the headset off.
20