About internal and auxiliary ring detectors
The internal or auxiliary ring detector detects the telephone ringer and sends a ring tone to the headset earpiece.
If you installed the lifter over the top of the corded phone speaker, the internal ring detector will recognize when the phone rings. However, if your corded phone speaker is located elsewhere on the phone, stick the auxiliary ring detector to the speaker as shown below.
Install the auxiliary ring detector
1.Insert the auxiliary ring detector plug into the RING DETECT jack on the lifter.
2.Remove the protective strip from the adhesive tape on the auxiliary ring detector.
3.Stick the auxiliary ring detector to the center of the corded phone speaker.
Auxiliary ring detector | Speaker |
|
Adhesive tape
RING DETECT jack
RING DETECT jack
Auxiliary ring detector plug
22