Vivotek FD7131 manual Build a security application

Build a security application

The Administrator can use the built-in motion detection to monitor any movement to perform many useful security applications. To upload the snapshots, users can choose either email, FTP, HTTP or Network storage according to user’s needs. All servers setting are in Server section on Application page. Refer to the definition section for detail configuration.

1.Click on “Configuration” on homepage,

2.Click on “Motion detection” at the left column,

3.Check “Enable motion detection”,

4.Click on new to have a new window to monitor video,

5.Type in a name to identify the new window,

6.Use the mouse to click, hold, and drag the window corner to resize or the title bar to move

7.Fine-tune using the “Sensitivity” and “Percentage” fields to best suit the camera’s environment. Higher “Sensitivity” detects the slighter motion. Higher “Percentage” discriminates smaller objects,

8.Clicking on “Save” enables the activity display. Green means the motion in the window is under the watermark set by Administrator and red means it is over the watermark,

9.Click on “Application” at the left column,

10.Add a server in server section,

11.Add a media with snapshot type in media section. And Set the number of pre-event and post-event images to be uploaded

12.Add a event in event section

zEnter one event name and enable this event.

zCheck the weekdays as you need and give the time interval to monitor the motion detection every day,

zSelect the Trigger on Motion detection and Check the window name set in step 5

zSet the appropriate delay time to avoid continuous false alarms following the

-27 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532