System parameters
"Host name" The text displays the title at the top of the main page.
“Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the camera’s operation being noticed.
"Time zone" Adjust the time with that of the
"Keep current date and time" Click on this to reserve the current date and time of the Network Camera. An internal
"Sync with computer time" Synchronize the date and time of the Network Camera with the local computer. The
Network Camera starts up. It will fail if the assigned
“Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server.
“Digital input” Select High or Low to define normal status of the digital input. The current status is shown, too.
“Digital output” Select Grounded or Open to define normal status of the digital output. The current status is shown, too.
“Flash Light” Select “Turn on white light LED in all condition” or “Only turn on white light LED in low light condition”.
Remember to click on to immediately validate the changes. Otherwise, the correct time will not be synchronized.
- 30 -
www.vivotek.com
T: 886-2-82455282
F: