Viewing Photos and Videos on TV

You can view your recorded videos and photos on a TV screen by connecting your Digital movie camera to the TV.

Note: Ensure that your TV is compliant with at least one of the following

digital playback standards: HDTV, NTSC or PAL.

To view videos or photos on a TV:

1.Turn off your Digital movie camera before making any connections to the TV.

2.Connect the video and audio plugs of the USB A/V-In cable to the input jacks of the TV.

3.Turn on the TV and change it to Video Mode.

4.Turn on your Digital movie camera.

5.Connect the other end of the cable to the MIC/AV-OUTport on your camera

6.On your Digital movie camera , press the Menu button and scroll to either Photo or Video and press the OK/Enter button located in the central position of the 5-Way Navigation Control.

You are now able to view recorded video and photos on your TV. Follow the same steps in "Playing Video and Photos" to browse, select and play videos and photos.

Connecting to a computer

To store and backup your recorded videos and photos from your Digital movie camera you will need to connect it to a computer.

To connect the camera to your computer:

1.Ensure that your Digital movie camera and your computer are both ON.

2.Plug the 8-pin USB cable into the A/V-Out port on your digital camera (located under the rubber protective flap) and plug the other end (the USB connector) to an available USB port on your computer.

3.The LCD panel of your Digital movie camera should black out and your stored photos and videos will be detected by Windows Explorer.

Note: You can choose to remove the SD memory card from the Digital movie camera and use a memory card reader connected to a computer to store and backup your videos and photos as well.

AgfaPhoto DV-5000Z