AGFA DC-1338i Using the Menus, Select an item, Change the setting, Open the Setup menu

Page 5

Using the Menus

When a menu is displayed, the four-way control and the SET button are used to make the desired settings.

REC menu

1

2

3

4

5

Turn the power on, and set the camera to the REC mode.

Open the REC menu.

yPress the MENU button to display the menu.

Select an item.

yPress or to select a menu item.

Change the setting.

y Press

or

to change the setting.

Press the MENU or the SET button to save the settings and close the menu.

Setup menu

1 Turn the power on, and set the camera to the REC or PLAYBACK mode.

2

Press the MENU button to open the REC or PLAYBACK menu.

yThe menu displays depends on whether you are in the REC mode or the PLAY- BACK mode.

3 Open the Setup menu.

yPress four-way control to select SETUP () and then press the SET button to display the Setup menu.

5

Image 5
Contents Disclaimer PrecautionsParts of the Camera Close the battery cover Inserting the Memory Card Inserting the Batteries Open the battery coverClose the battery cover Insert the batteriesSet the camera to the REC mode Launch the mode palette Changing the ModeSelect a mode Set the camera to the REC modeChange the setting Using the MenusOpen the Setup menu Select an itemPress the four-way control Press the Menu button to close the menu Using the StabilizerOnline Service / International contact Customer care Service & Repair Hotline EUService & Support Hotline Germany FCC Compliance and Advisory Declaration of Conformity