AGFA DC-830i Choosing a Startup Image, Turn the power on, and set the camera to the Playback mode

Choosing a Startup Image

1	Turn the power on, and set the camera to the PLAYBACK mode
	( page 13).
2	Open the menu.

yPress the MENU button, then use the four-way control to select Start-up

Image () and press the SET button.

3 Press or to select the image you want, then press the SET button to

apply the choice.

yA message “Completed” appears.

4

5

6

Set the camera to the Setup Menu ( page 16).

Press or to select Start-up () then press or the SET

button.

Press or to select a desired option and press the SET button to apply the setting.

[Off]: Disable the start-up image.

[System]: Use camera default image.

[My image]: Use the image that you just specified in step 3.

7 Press the MENU button to close the menu.

Caution

yThe start-up image will not be deleted even if the original image is deleted or memory formatted.

43