AGFA DC-533 user manual Using the Self-timer & Burst

Using the Self-timer & Burst

Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Use the burst to record four continuous still images shooting.

1.Set the camera to the Record mode This function only used in still image shooting.

2.Press the button to change the settings:

Display	Option
-	Single shot
	2-SEC
	10-SEC
	Double

Description

Record a single image.

The shutter release will be delay for 2 seconds.

The shutter release will be delay for 10 seconds.

Record two images in a shot after pressing the shutter release button 10 and 12 seconds.

Burst

For capturing 4 images in succession.

3. Shoot the image.

Each option automatically switches to single shot in the following situation: After each shot.

When the mode switched.

When the camera is turned off.

NOTE:

When using the self-timer function, be sure to use a tripod or place the digital camera on a level, stable surface.

This function is not available to resolution 8M.

- 23 -