Edimax Technology i-Watcher Pan/Tilt Internet IP Camera Hardware Reset Function, WAN IP Address

Page 29

12. Hardware Reset Function

Use Pin to push Reset button hole 10 sec, the

Camera will reset , mean is all setup value back

To factory default.

When you want to reset camera, the camera must in Power on status.

When you need use reset button ?

zLose of administrator password

zIncorrect network configuration

zTo reset the i-WATCHER IP-Camera

zTo reset IP address for LAN or WLAN

zMake sure the i-WATCHER is power on.

zThere is a small reset hole at the side of the i-WATCHER

zInsert an object to depress the reset button inside the hole

zDepress the reset button for 5 seconds and the i-WATCHER will automatically

zReset itself back to the default factory setting.

13. Accessing i-WATCHER over the Internet

If your home or business LAN is connected to the Internet through a high speed (broadband) Internet connection, with at least 128 kbps upload bandwidth, you can access your cameras via the web browser from anywhere on the Internet. To do this you would need to:

1.Know your WAN (Internet) IP address. This is the IP address that your Internet Service Provider provides you to access the Internet. It may be static (always the same) or dynamic (can change from time to time).

2.Make sure the two ports used by the camera (80 & 1600) are forwarded by your router or gateway to the camera.

3.Make sure your camera default gateway is set to the LAN (local) IP address of your router/gateway.

13-1. WAN IP Address

The WAN (Wide Area Network) IP address that your Internet Service Provider provides you so that you can access the Internet is very different from the LAN or local IP address that your PCs and cameras are using to connect to your local network. Your WAN or Internet IP address is visible to the outside world (Internet) whereas your local addresses are not. To find your home or business network from the Internet you must know your WAN IP address.

Your WAN IP address is stored by your gateway router, which uses it to connect to the Internet. All the devices on your network connect to the Internet via your gateway router. You can find your current WAN IP address by checking your router status page. There are also various websites such as www.whatismyip.com which will tell you the IP address that you are currently using to access the Internet.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Watcher Table of Contents Save as Jpeg Save as AVI Save Current Picture As… Snapshots Image RecordingNetwork Utilities POEPower over Ethernet Function Pan and Tilt Control„ Up to VGA 640 X 480 Resolution „ Supports Dynamic IP And Various Network Mode„ Remote Surveillance Becomes Handy „ Unique Dynamic IP Ddns ServerSystem Requirements Package ContentsNetwork Hardware Description and FeaturesWireless LAN Watcher Hardware SpecificationWatcher Hardware Setup LAN Setup InstallationConnect the Power to the i-WATCHER Plug the Ethernet cable into i-WATCHERUsing IPEdit.exe to test the IP-Cam Ensure the Camera power light is lightingUsing IE to view i-WATCHER image Connect to the Adsl Modem or LAN HubWatcher Hardware Setup Wireless LAN Setup Connecting to an Access Point AP Accessing the i-WATCHER On the LAN use with the Adsl Router On the LAN with Dhcp ServerOn the LAN without Dhcp Server Watcher Network Camera on-line Change PasswordAccess the i-WATCHER by ordinary user login Camera Control Quality SettingView Log File Operation ModeWatcher provides 6 types of configurations ConfigurationWAN System SetupMotion Detect Setup User SetupMotion Detect Enable / Disable Delete UserMotion detected message on the main window Motion detected mail function Mail SettingMotion detected mail FTP uploads when motion detected Alert in SetupAlert OUT Setup Alert in SettingMotion detected message on main window Alert in Enabled Alert in with Motion detected mail function Mail SettingManual Setup LAN for fixed IP address users Network SetupFTP uploads when motion detected Alert in Enabled Check the Audio format Audio SetupCheck the Server Configure Snapshots Save as AVI Image RecordingSave as Jpeg Save Current Picture As… Gpio FunctionAccessing i-WATCHER over the Internet Hardware Reset FunctionWhen you need use reset button ? WAN IP AddressPort Forwarding Network Address Translation NATDetermining your IP Address and Network Settings Default GatewayNetwork Utilities Windows 98/MeWindows 98/Me/2000/XP Using PingIP Edit PoE Power Over Ethernet Function Image Rotate setting Position points presettingPan and Tilt Control Control the camera in the monitor windowWidth = 320 height=240 , video size Html Code for your website or blogWatcher Installation Method Watcher Installation MethodWatcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method

i-Watcher Pan/Tilt Internet IP Camera specifications

The Edimax Technology i-Watcher Pan/Tilt Internet IP Camera is an advanced surveillance solution designed to enhance the security of homes and businesses. With its array of features, this camera provides a perfect blend of performance, design, and user-friendliness, making it an ideal choice for both novice users and tech-savvy individuals.

One of the standout features of the i-Watcher is its Pan/Tilt functionality. Users can remotely control the camera to cover a wider area, allowing them to monitor different parts of a room or property effortlessly. This is particularly beneficial for larger spaces where a stationary camera may not provide comprehensive coverage.

Equipped with a high-resolution image sensor, the camera delivers crisp and clear video footage. With the capability to stream in HD quality, users can enjoy enhanced details during both day and night. Furthermore, the integrated infrared night vision technology ensures that surveillance continues even in low-light conditions, providing peace of mind around the clock.

The Edimax i-Watcher incorporates advanced connectivity options, including built-in Wi-Fi, facilitating easy wireless setup and operation. This wireless capability eliminates the hassle of stringing cables, allowing for flexible installation in various locations throughout a property. Additionally, the camera is compatible with a range of devices, including smartphones, tablets, and computers, enabling users to access live feeds and recorded footage from virtually anywhere.

The camera features motion detection alerts, which notify users of any unusual activity in the monitored area. This technology enhances security by allowing for timely responses to potential threats. Users can customize alert settings according to their preferences, ensuring that they only receive notifications that matter to them.

Moreover, the i-Watcher supports two-way audio communication, allowing users to listen and speak through the camera. This feature is invaluable for interacting with family members or pets and can serve as a deterrent to intruders.

The Edimax i-Watcher Pan/Tilt Internet IP Camera combines innovative technology with practical features to provide a reliable surveillance solution. With its easy installation process, remote accessibility, and advanced monitoring capabilities, it stands out as an excellent choice for anyone looking to enhance their security system.
Top Page Image Contents