Edimax Technology i-Watcher Pan/Tilt Internet IP Camera user manual Using Ping, IP Edit

Page 32

14-2. Using PING

PING is a very useful utility for checking to see if a camera is responding or checking to see if an IP address is available.

In Windows 98/Me,

PING is located in C: \Windows.

In Windows 2000/XP,

PING is located in C: \Windows\System32.

Windows 98/Me/2000/XP:

1.Click on Start ->Run and type in: command and then press ENTER

2.In the MS- DOS window, type in: ping XXX.XXX.XXX.XXX and then press ENTER

3.(where XXX.XXX.XXX.XXX is your IP address) For example, if your Camera uses the IP address of 123.123.123.1, you would type in: ping 123.123.123.1

If there is a camera, or a PC or other network device online and using this address you will see:

Pinging 123.123.123.1 with 32 bytes of data:

Reply from 123.123.123.1: bytes=32 time<1ms TTL=128

Reply from 123.123.123.1: bytes=32 time<1ms TTL=128

Reply from 123.123.123.1: bytes=32 time<1ms TTL=128

Reply from 123.123.123.1: bytes=32 time<1ms TTL=128

Ping statistics for 123.123.123.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in mill-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

If there is NO response on this address you’ll see

Pinging 123.123.123.1 with 32 bytes of data:

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Ping statistics for 123.123.123.1:

Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

This indicates that the address is available for use. However, there could still be a device which is currently offline which is configured to use the address. To be certain, make sure all your network devices are on and connected to your network when checking for address availability.

14-3. IP Edit

IP EDIT.EXE is used to scan the Installed i-WATCHERs and set the Camera Name and IP Address.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Watcher Table of Contents Snapshots Image Recording Save as Jpeg Save as AVI Save Current Picture As…POEPower over Ethernet Function Pan and Tilt Control Network Utilities„ Supports Dynamic IP And Various Network Mode „ Up to VGA 640 X 480 Resolution„ Remote Surveillance Becomes Handy „ Unique Dynamic IP Ddns ServerPackage Contents System RequirementsHardware Description and Features NetworkWatcher Hardware Specification Wireless LANInstallation Watcher Hardware Setup LAN SetupConnect the Power to the i-WATCHER Plug the Ethernet cable into i-WATCHEREnsure the Camera power light is lighting Using IPEdit.exe to test the IP-CamUsing IE to view i-WATCHER image Connect to the Adsl Modem or LAN HubWatcher Hardware Setup Wireless LAN Setup Connecting to an Access Point AP Accessing the i-WATCHER On the LAN use with the Adsl Router On the LAN with Dhcp ServerOn the LAN without Dhcp Server Watcher Network Camera on-line Change PasswordAccess the i-WATCHER by ordinary user login Quality Setting Camera ControlOperation Mode View Log FileConfiguration Watcher provides 6 types of configurationsSystem Setup WANUser Setup Motion Detect SetupMotion Detect Enable / Disable Delete UserMotion detected message on the main window Motion detected mail function Mail SettingMotion detected mail Alert in Setup FTP uploads when motion detectedAlert OUT Setup Alert in SettingAlert in with Motion detected mail function Mail Setting Motion detected message on main window Alert in EnabledManual Setup LAN for fixed IP address users Network SetupFTP uploads when motion detected Alert in Enabled Check the Audio format Audio SetupCheck the Server Configure Snapshots Save as AVI Image RecordingSave as Jpeg Gpio Function Save Current Picture As…Hardware Reset Function Accessing i-WATCHER over the InternetWhen you need use reset button ? WAN IP AddressNetwork Address Translation NAT Port ForwardingDefault Gateway Determining your IP Address and Network SettingsNetwork Utilities Windows 98/MeWindows 98/Me/2000/XP Using PingIP Edit PoE Power Over Ethernet Function Position points presetting Image Rotate settingPan and Tilt Control Control the camera in the monitor windowHtml Code for your website or blog Width = 320 height=240 , video sizeWatcher Installation Method Watcher Installation MethodWatcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method Watcher Installation Method

i-Watcher Pan/Tilt Internet IP Camera specifications

The Edimax Technology i-Watcher Pan/Tilt Internet IP Camera is an advanced surveillance solution designed to enhance the security of homes and businesses. With its array of features, this camera provides a perfect blend of performance, design, and user-friendliness, making it an ideal choice for both novice users and tech-savvy individuals.

One of the standout features of the i-Watcher is its Pan/Tilt functionality. Users can remotely control the camera to cover a wider area, allowing them to monitor different parts of a room or property effortlessly. This is particularly beneficial for larger spaces where a stationary camera may not provide comprehensive coverage.

Equipped with a high-resolution image sensor, the camera delivers crisp and clear video footage. With the capability to stream in HD quality, users can enjoy enhanced details during both day and night. Furthermore, the integrated infrared night vision technology ensures that surveillance continues even in low-light conditions, providing peace of mind around the clock.

The Edimax i-Watcher incorporates advanced connectivity options, including built-in Wi-Fi, facilitating easy wireless setup and operation. This wireless capability eliminates the hassle of stringing cables, allowing for flexible installation in various locations throughout a property. Additionally, the camera is compatible with a range of devices, including smartphones, tablets, and computers, enabling users to access live feeds and recorded footage from virtually anywhere.

The camera features motion detection alerts, which notify users of any unusual activity in the monitored area. This technology enhances security by allowing for timely responses to potential threats. Users can customize alert settings according to their preferences, ensuring that they only receive notifications that matter to them.

Moreover, the i-Watcher supports two-way audio communication, allowing users to listen and speak through the camera. This feature is invaluable for interacting with family members or pets and can serve as a deterrent to intruders.

The Edimax i-Watcher Pan/Tilt Internet IP Camera combines innovative technology with practical features to provide a reliable surveillance solution. With its easy installation process, remote accessibility, and advanced monitoring capabilities, it stands out as an excellent choice for anyone looking to enhance their security system.
Top Page Image Contents