USING THE CLIENT SOFTWARE
5.3 Motion Detection Control
The motion detection function of the DVS provides you with the ease and convenience of
automatic monitoring from a remote location. Pressing the 
(Motion detection) button brings up the motion sensitivity control window shown in Figure 11. If you wish to use video motion detection, you can set the sensitivity level using the Motion threshold slider. You can test the sensitivity level. The Running man image will start to flash when motion is detected. It is also possible to assign motion detection to cameras by checking Include /exclude camera in motion detection check box.
Break connection and switch to callback mode | Motion threshold slider | |
Include /exclude camera in motion detection | Running man | |
Current motion activity indicator | ||
|
Figure 11 Motion sensitivity control window
Note: 1. When this window is activated, images in the Image window will be updated as an alarm event. To return back to normal image update you should deactivate this
window by pressing 
again or by activating another control window.
2.Sometimes one or more video inputs can be sensitive, even though there is no visible motion in the monitoring areas. This may be due to daylight lamp usage (not incandescent lamp) different camera types, or possibly different electrical levels of video input signals (perhaps video cable connection quality). Try changing the video inputs, or refrain from using certain video inputs for motion detection purpose.
After pressing the Break connection and switch to callback mode button, the DVS will go to Callback mode. Please refer to the section 5.9 for the details on the callback function.
30 | Digimerge Dialup Video Server User’s Guide |