Digimerge DNS1010 manual Hardware Connections

Page 3

1

Hardware CONNECTIONS

A

Mounting Instructions: Run the cables to the desired location. Securely mount the device to a wall or other surface using 4 metal screws (not provided).

WALL MOUNT

TABLE MOUNT

B

Connect the network cable to the Video Server’s RJ45 network connector.

C

Connect a BNC camera (not included) to the Video Server’s BNC Input port (left port). Optionally, an audio input device (i.e. Microphone) can be con- nected to the Audio In port. The Video Out port can be used to connect a local monitor (no audio).

DOPTIONAL

Connect the mini-DIN Terminal Block cable to the Video Server’s DIN connector. For more details on the available Terminal Block connections, please check the hardware user manual.

E

Connect the supplied power adapter to the power connector on the Video Server.

w w w .d i g i m e r g e .c o m

DNS1010_Quick Installation Guide_En_R1 Page 

Page 2 Page 4
Image 3
Page 2 Page 4
Contents DNS1010 Package Contents Hardware Connections Home Find Devices Register Install Software InstallationSoftware SET-UP HomeMenu View Live Image C1 OptionalOpen Device in Browser Software SET-UPCreating Current User Account Levels of User AccessThis page is intentionally left blank C4 Optional Registration & Software Installation16 ch Application InstallationSurveillance Software Surveillance Application Hardware RecommendationSelect the Create Account Enter http//ddns.digimerge.netCreate Account Port Forward your Router Ddns SET-UP and RegistrationMore Flexible Centralize vs Localize Power SourceExamples of PoE installations using… PoE Endspan Lower CostsDigimerge ip camera LINE-UP IT’S ALL on the WEB
Top Page Image Contents