CCDS Acquisition Camera User’s Manual
3. Normal Acquisition Operation
Once a link is established with the camera and the temperature regulation is turned on, you are ready to use the system.
Under most circumstances you will want to use the “Focus” mode of the camera. This mode quickly reads out the entire CCD (unbinned or binned 2x2 or 3x3) and auto- displays it to the screen. You can choose an integration time from 0.12 to 600 seconds. Note that there will generally be substantial dark current in a 600 second exposure.
To begin taking images, click on the “Focus” button on the CCDOps Toolbar. This will open a dialog box in which you may enter the exposure length:
Figure 4. Focus Dialog Box
Normally you should leave the other settings in this dialog box as they are shown in Figure 4.
Click OK and the system will begin taking images immediately. Stop the focus sequence by clicking on “Focus” in the Toolbar or by hitting Esc. To change the exposure time, stop the focus sequence and begin it again; each time you start a focus sequence the system will ask for an exposure length. Pause focus mode with the “Pause” button in the “Focus” window that pops
Reminder: exposure lengths may vary from 0.12 seconds to 600 seconds. The download time for an image is less than 1 second, so for bright objects you should get an update rate of about 1 Hz.
6