Setting up the Camera
1.Switch the epsilon 2.1 on by holding down the Power On/Off switch for a second.
2.Turn the mode selection switch so that the 
is lined up with red spot next to the power On/Off button.
3.Press the 
(Mode) button on the camera and then the 4 way controller right until the “setting” mode is displayed.
4.Use the 4 way controller up and down to cycle through the options.
5.Press the 
(Set) button to enter that option.
6.Use the 4 way controller to change the option.
7.Press the 
(set) button to save the option that you have changed.
8.To exit the mode settings simply press the 
(mode) button at any time.
4 way controller | Exposure | White balance | Settings | Format |
Exposure
Use this option to set the camera’s exposure for 
Manual picture taking only.
White Balance |
|
Use this option to adjust the light balance of the camera in | Manual mode only. Select the appropriate light source from |
the list. The options are: |
|
Auto |
|
Daylight |
|
Shade |
|
Tungsten |
|
Flourescent. |
|
Format
To clear the entire contents of the SD card or internal memory select “yes” and click on the set button to confirm.
5