![](/images/new-backgrounds/1130012/13001233x1.webp)
SETTING UP THE VCR
TURNING ON OR OFF THE
AUTO VCR Plus+ DOWNLOAD
If the automatic VCR Plus+ download continuously fails for any reason, you will see the prompt:
VCR PLUS+ SETUP
Last automatic setup was unsuccessful. Would you like to:
1 Try again
2 Finish setup manually
3 Cancel the auto setup
If you decide to turn off Auto VCR Plus+ all together, you can do this by:
1.Press the MENU button on the remote control to access the VCR’s MAIN MENU
2.Press 4 to access the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
0Exit
3.Press 4 to access the VCR Plus+ Setup menu.
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+: ON
VCR Plus+ data was not found.
4.Pressing 1 will take you to a screen to manually map VCR Plus+ channels. Pressing 2 will toggle between Auto VCR Plus+ ON or OFF.
Make sure this feature is turned off if you continually get “fail to download” prompts and map the channels manually.
15