RECORDING
TIMER RECORDING
You can set up as many as eight timer recording programs.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3Time
4Channels
5Setup
6Preferences
7Audio
8Language
0Exit
2.Press 2 to display the TIMER RECORDINGS menu.
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
3 Use VCR Plus+ Code
0Exit
3.Select 1 to Create a New Program.
How often should this program record?
1 One time
2 Daily (every day)
3 Weekdays
4 Weekly (once per week)
0Cancel
4.Select how often you want the program to record.
Program 1 (One time)
Channel | |
Start Time | |
End Time | |
Start Date | |
Tape Speed | SLP |
Press MENU to cancel
5.Enter the data for the program with the number buttons.
The data includes the channel number (press INPUT to select the line input), start time, and end time (including AM or PM). The start date is automatically entered based on the VCR clock. The date and/or speed can be changed when flashing.
(Continues on next page)
Timer Recording Information
The Clock must be set correctly.
Insert a tape with the safety tab in place and enough tape to record the program.
“PROGRAMS OVERLAP” appears if you have entered two programs whose times overlap.
The Timer ( ) indicator appears in
the display when you turn off the VCR and a timer recording has been set. It flashes if there is no tape in the VCR.
When recording from a cable box or satellite receiver that the VCR cannot control, turn on that unit and tune it to the channel you want to record before the recording is to begin. The VCR channel should be set to the cable box’s output channel (usually Channel 3 or 4).
31
