RCA 15530130, VR702HF manual Cable BOX Setup, Cable Box Setup, Press 4 to display the Channels menu

SETTING UP THE VCR

CABLE BOX SETUP

This setup applies only when all channels are received through the cable box. There are two steps:

•The first sets up the VCR for the output channel of the cable box signal.

•The second sets up the VCR for a remote-controllable cable box so the VCR can control the cable box by changing channels for timer or VCR Plus+ recordings. Position the remote-controllable cable box above the VCR as shown in the Connections section.

1. Press MENU to display the VCR MAIN MENU.

VCR MAIN MENU

1 VCR Plus+

2 Timer Recordings

3Time

4Channels

5Setup

6Preferences

7Audio

8Language

0Exit

2.Press 4 to display the CHANNELS menu.

CHANNELS

1 Auto Channel Search

2 Add/Remove Channels

3 Signal Type: CABLE

4 VCR Plus+ Setup

5 Cable Box Setup

0Exit

3.Press 5 to display the CABLE BOX SETUP menu. Then select one of the three choices.

CABLE BOX SETUP

Do you use your cable box to receive ALL channels or only SOME channels?

1 ALL channels

2 Only SOME channels

3 Cancel setup

4.If you selected ALL channels, enter the output channel of your cable box, usually 03, 04, or video line input and press MENU.

Cable Box Setup

ALL channels: enter two numbers for output channel of your cable box or press INPUT if you connect your cable box with AUDIO/VIDEO jacks.

Only SOME channels: if you only use the cable box to tune premium channels.

Cancel setup: select to cancel.

9