Section 3: Design, Print and Imprint
A. Design the LX Label
Design your LX label according to the instructions that come with you printer. Keep in mind there are variations in the placement of the foil. Foil can be printed over the top of areas that have already been printed on with the LX printer. In other words, there is no need to leave a white unprinted space for a foil border or graphic.
See examples below:
LX Sample 1 | LX Sample 2 |
B. Design the FX Label
Design the FX Label using any design software. The page size of your design should be the same as the page size of the LX label and the same as the label size. The design should be monochrome black only. It is useful to print the LX label first and then determine the placement and size of the FX label relative to the position of objects on your LX label.
See example below:
FX Sample 1 | FX Sample 2 |
11