Introduction:
Thank you for purchasing the FX400 metallic foil and laminate thermal printer. You can use your FX400 with a Primera LX400, LX800 or LX810 printer. Using your LX printer and the FX400 you can first print a full color label and print gold or silver borders, accents, and text or laminate the label to protect against water and fading. For the purposes of this manual the LX400, LX800 or LX810 will collectively be referred to as the “LX Printer”. Metallic Foil or laminate will be collectively referred to as “media”.
Section 1: Install Software and Setup the Stand
A. Install Software:
You must first install the Primera PTFoil software and the
FX400 driver.
1.Place the Installation Disc in the computer
2.Follow the prompts to install the print software.
Note: If the Installer does not start, open My Computer on your desktop. Double- click the icon of the appropriate CD/DVD drive containing the Software Installer disc.
3.Connect power to your FX400.
4.Connect the FX400 to your PC with your beige USB 2.0 Cable.
After a few moments, Windows will tell you it has found new hardware and is looking for software to install it.
3