Kodak ESP 3 manual Install Software, Windows

5 Install Software

WINDOWSWINDOWS WINDOWSWINDOWS WINDOWSWINDOWS WINDOWSWINDOWS WINDOWSWINDOWS WINDOWSWINDOWS WINDOWSWINDOWS

WINDOWS

WINDOWS

WINDOWS WINDOWSWINDOWS

WINDOWS

IMPORTANT: Do not connect the USB cable to the printer until instructed during software installation.

a)Load the Kodak AiO Printer Software CD into the CD-ROM drive. Follow the on-screen prompts when the instructions appear.

If instructions do not appear, click Start, then Run. Select CD-ROM drive and type setup.exe, then press ENTER.

b)Connect the USB cable to the printer when instructed. Continue to follow the on-screen prompts until installation is complete.

MACINTOSHMACINTOSH MACINTOSHMACINTOSH

MACINTOSH

MACINTOSH

MACINTOSH

MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH

MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH

MACINTOSH

a)Connect the USB cable to the printer and your Macintosh computer.

b)Load the Kodak AiO Printer Software CD into the CD-ROM drive.

The Kodak AiO Printer software installer window should be displayed. If not, double-click the Kodak AiO Printer Software CD icon on the desktop. Follow the on-screen prompts until installation is complete.

www.kodak.com/go/aiosupport 8