For Long Operating Life
Unsuitable materials for cleaning the printer
Paint coat flaking and plastic deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or any other solvent, if rubber or PVC items are left in contact with the unit for a extended period, or if the unit is sprayed with insecticide.
Care of the cabinet
Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry completely before operating. Never use
Head abrasion
The thermal print head, like a video head, wears out. When it is worn, fine details of the picture are not printed, requiring replacement of the thermal head. Consult your dealer about having the head replaced.
Connecting devices
Read thoroughly the Safety Notices, Cautions, and Operating Precautions of the instruction booklets for the other devices connected with the unit.
Caution on relocating
When transporting this unit, make sure to avoid impacts. Before moving the unit, make sure to disconnect the power cord from the power outlet and the cables from the connected devices. Remove the paper tray and ribbon.
CONTENTS SEARCH HELP
Introduction
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories and
Supplies