Identifying the Parts
●Printer Body
Identifying the Parts
Operation panel
This is used when printing after inserting a card directly into the printer. (Refer to the section on the “Operation Panel” on page 7 for further details.)
Printer cover
This is opened when installing or replacing the ink cassette.
Power (ON/OFF) switch
Paper output tray
This is pulled out when
printing.
Paper discharge opening
Paper is discharged from this
opening after printing.
Paper cassette compartment lid
Dust Cover
The dust cover is opened when the
paper cassette is inserted.
Cover eject lever
SmartMedia slot
SmartMedia containing recorded images is inserted into this slot when printing directly from a SmartMedia.
PC card eject button
This button is pressed to remove the PC card.
PC card slot
This slot is for inserting PC cards complying with PC standard ATA specifications (PCMCIA). Type II PC cards can be used.
Use a PC card adapter or similar device when printing CompactFlash or memory stick data.
USB connector
This connector is used to connect
a USB cable from a computer.
Parallel connector
This connector is used to connect
a parallel cable from a computer.
AC power connector
This connector is used to connect the power cord.
6 US