Epson R800 manual 、1、General Guide, 、Printer testing, 、Installation Procedures

Page 2

CIS for EPSON Stylus Photo R800 Instruction

Thank you for purchasing XM Continuous Ink Supply System. We appreciate your support and will try our best to make your experience with our products a pleasant one. Printing has been a different experience ever since you installed XM Continuous Ink Supply system on your own printer. Just imagining being able to print without regard to the ink level in those expensive little cartridges.

Please take your time installing XM Continuous Ink Supply system. Do not remove your old cartridge until you have the XM CIS system primed and ready to install (to prevent the drying of heads). In addition, make sure you are getting perfect nozzle checks before installing the XM CIS system. The XM CIS system won’t be able to work properly if the nozzles are previously clogged.

Most people get a perfect nozzle check the first time after installing the XM Continuous Ink Supply system; others may need to run two or three cleaning cycles or let the printer sit for a while before they get the perfect results.

一、1General Guide:

1) Components

ACIS system

1 set

 

BAir filters

8pcs

CSupport Arm 1 set

DRefill Kit

8 pcs

 

EInstruction CD

1pc

 

 

 

 

 

 

 

 

 

 

 

2) Opening box inspection

aCheck whether all the accessories are ready.

bCheck whether there's leakage of CIS System, whether some tubes have been separated from CISS. If there is, please kindly to contact the local dealer.

cCheck whether there is air space in the tube. If the length of air space is more than 20cm, please clean the printer head for 2 or 3 times before printing.

二、Printer testing:

1)Check whether the printer is in normal condition, like mechanical status, lubrication status etc.

2)Print testing lines to ensure the printing head is good condition.

3)Print pictures to see whether the printing image is ok.

三、Installation Procedures:

1、First step

Image 2
Contents Installation Instruction For XM Prefilled Version With Auto Reset Chips、1、General Guide 、Printer testing、Installation Procedures CIS for Epson Stylus Photo R800 Instruction、Step 、Second step Remove the Cartridge、 , Fix Supporting Arm 、Step Seven Adjusting the Tube 、Ninth step Checking the Printing head 、Reset Procedure、Refill Ink 、Notice 、Attention for maintenance、Close the cartridge cover as the below pictures shown
Related manuals
Manual 53 pages 51.35 Kb