Epson R800 manual 、Step, 、Second step Remove the Cartridge

Page 3

Put the CISS on the left side of the printer. In the meantime place all the tubes at correct position.

Pull out the small rubber plug from the air hole as above picture shown.

Place 6pcs of air filters into air holes, the thicker side is down into tank.

2、Second step: Remove the Cartridge

ABC

1)Press the ink cartridge replace button(Picture A) on the printer to move the cartridge to the cartridge remove position (Picture B).

2)Unplug the power connector at the back of the printer (Pic.C)

3、Step 3.

1)Remove the spring on the left of cartridges car. (Pic.A)

2)Open the cartridge cover to certain angle (Pic.B); Then use a small screwdriver to loosen the cartridge cover, then remove it. (Pic.C-F)

ABC

DEF

Image 3
Contents For XM Prefilled Version With Auto Reset Chips Installation InstructionCIS for Epson Stylus Photo R800 Instruction 、Printer testing、Installation Procedures 、1、General Guide、Second step Remove the Cartridge 、Step、 , Fix Supporting Arm 、Step Seven Adjusting the Tube 、Reset Procedure 、Refill Ink、Ninth step Checking the Printing head 、Attention for maintenance 、Close the cartridge cover as the below pictures shown、Notice
Related manuals
Manual 53 pages 51.35 Kb