Sony CMA-H10 Location and Functions of Parts, IN/OUT sync input/output selector

Location and Functions of Parts

3WE. OUT (Write Enable pulse output) connector

(BNC type)

Outputs the WE pulse to communicate the timing to store the image on an external frame memory, etc.

For detailed information, read the instruction manual of the DXC-H10.

4TRIG IN (trigger input) connector (BNC type) Inputs the trigger pulse. You can control the electronic shutter by using the trigger pulse input to this connector. For detailed information, read the instruction manual of the DXC-H10.

5HD (horizontal deflection) input/output connector

(BNC type)

Inputs or outputs the HD signal. Input or output can be selected by setting the IN/OUT selector 7.

6VD/SYNC (vertical deflection/sync) input/output connector (BNC type)

Inputs or outputs the vertical deflection signal, tri-level sync signal or bi-level sync signal. Input or output can be selected by setting the IN/OUT selector 7.

The type of sync signal is set on the PAGE 3/3 menu of the video camera.

7IN/OUT (sync input/output) selector

Set to IN to use the HD connector 5 and VD/SYNC connector 6 as inputs, and to OUT to use them as outputs. It should be set to OUT when external sync is not used.

Using the HD and VD/SYNC connectors

The following table shows how to use the HD and VD/ SYNC connectors combined with the menu setting on the video camera and the IN/OUT selector on this unit.

	Menu	IN/OUT	Function of connector
Purpose	setting on	selector
	camera	setting	HD	VD/SYNC
To use HD and	Any	IN	HD signal	VD signal
VD signals for			input	input
external sync
To use SYNC	Any	IN	Not used	SYNC
signal for				signal input
external sync
To use HD and	Set SYNC/	OUT	HD signal	VD signal
VD signals	VD to VD on		output	output
output from the	PAGE 3/3
camera	menu
To use SYNC	Set SYNC/	OUT	HD signal	SYNC
signal output	VD to SYNC		output	signal
from the	on PAGE 3/			output
camera	3 menu

24