Complete Guide to the Arcam FMJ A18 Stereo Amplifier Remote Control

remote control

The CR10 remote control

The CR10 is pre-programmed for use with the A18 as well as Arcam CD players (such as CD17).

The CR10 requires a clear line of sight to the front panel display of A18 to ensure reliable operation. Make sure you have inserted the two AAA batteries supplied before attempting to use the CR10.

Keys on the CR10 that control the A18 are shown not greyed-out.

Inserting batteries into the remote control

1.Squeeze the tab and lift off the remote control’s battery compartment cover.

2.Insert the two ‘AAA’ batteries supplied in the proper direction, following the ‘+’ and ‘–’ marks in the battery compartment.

3.Replace the battery compartment cover, locking the tab with a click.

��

� � �

��

�

��

Amplifier commands

-Toggles the mute function to silence speaker output. Mute is displayed on screen when active.

Vol –	Decrease (VOL–) and increase (VOL+)
VOL +	amplifer volume
Source	Selects the amplifier input:
keys	DVD	DVD input
	SAT	Satellite decoder input
	AV	AV (television sound) input
	TUN	DAB/FM/AM tuner input
	AUX	Auxiliary line input
	PVR	Personal Video Recorder input
	CD	CD input
	PHO	Phono input
BASS	Adjust bass levels (using Vol– and Vol+
	controls) between -7, through 0, to +7
TREB	Adjust treble levels (using Vol– and Vol+
	controls) between -7, through 0, to +7
BAl	Adjust balance levels (using Vol– and Vol+
	controls) between L (left) 9, through 0, to
	R (right) 9
PROC	Toggles between PROC ON and OFF.
	PROC mode is only available if the AV input
	is selected
	When in PROC mode, the Vol - and Vol +
	can be used to adjust the PROC volume
	setting.
DRCT	Toggles direct mode (i.e. tone defeat)
Disp	Cycles through display panel brightness
	options (bright, off, dim)
Mode	Cycles through displaying the settings for
	Bass, Treble and Balance

English

E-9