Canon manual Write With Retries Operation, Measurement Options Dialog Box in WITE32 version

Page 19

WITE32 Release Notes Version 3.11

•Changes in the configuration of Guzik Technical Enterprises PCI boards (adding/removing/changing PCI slot) on the host computer do not require to reinstall the driver from the WITE32 installation disk.

2.5The Write With Retries Operation

A new type of operation is implemented in WITE32 revision 3.11: the Write With Retries operation. This is a special case of the write operation when the RWA shuts down the write gate in the sectors, in which the spinstand detects that the Position Error Signal (PES) exceeds the specified tolerance. The software can repeat attempts to write the failed sectors until the specified percentage of the sectors is successfully written or the maximum number of attempts is reached.

The spinstand generates a signal indicating that the Position Error Signal is within the specified tolerance. The PES in Tolerance signal is provided to the Scope Point 7 output of the spinstand control box.

In order to use the Write With Retries operation you must connect the Scope Point 7 output to the Index In input of RWA using a BNC-to-BNC cable, and check the Enable “Write With Retries” Operation check box in the Measurement Options dialog box (click the Configure Measurement Options…menu item of WITE32 Engineering Dashboard to open the dialog box).

Note:

Never connect the Scope Point 7 of the spinstand control box to the Index In connector of RWA before you enable the

 

Write With Retries Operation check box. If you do not enable the check box, the spinstand Control Box will provide the

 

Position In Tolerance signal to the Index In connector of RWA, and WITE32 will not perform RWA initialization properly due

 

to incorrect index signal.

Figure 15 Measurement Options Dialog Box in WITE32 version 3.11

In WITE32 version 3.11 only ATI test uses the Write With Retries operation, please refer to the WATI Module Users Guide (P/N 02-107268-02) for more details on the ATI test.

The following hardware is required for the Write With Retries operation:

•RWA Control board revision R or later installed in the Read Write Analyzer.

•Servo Controller 3+ revision G or later, or any revision of Servo Controller 4 board installed in the SCB- 2002 box.

Guzik Technical Enterprises

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents WITE32 Table of Contents Support of Servo Revision 3 for RWA-2000 Series Comb Loader for Guzik V2002 SpinstandsPing Pong Cartridge Design for Guzik 1701A+ Spinstands Chapter NEW Hardware Supported WITE32Hardware Compatibility Micro Actuator Support for Guzik V2002 SpinstandsMicro Actuator Tests Head Stacks Head AmplifiersSupport of Head Amplifier Multiplexer Chapter WITE32 Modifications New System Erase and System Band Erase ConfigurationInterleave Band Erase Tests Without Erase Configuration Using System Erase In WITE32 TestsTests With Erase Configuration Original erase operation parameters SNR Test Erase Configuration in WITE32 version Tests With Band Erase ConfigurationNew button opens erase configuration dialog box Tests With Erase Preconditioning 2 V2002 Product Parameters Dialog Box Modifications New Servo Control Dialog BoxDialog Box Layout and Tab Pages Changes of the Disk Type Control Head Geometry Parameters Micro Actuator Parameters XY Alignment Test New Installation Procedure For Guzik PCI BoardsMeasurement Options Dialog Box in WITE32 version Write With Retries OperationTAA Calibration Through Programmable Differentiator Error / Warning Report ModificationTest End check Head Selection in the WITE32 Engineering DashboardMiscellaneous Write Pattern Operation ConfigurationParameter Caption In WITE32 version Chapter Fixed Bugs V2002 SpinstandAnalog Front End Other Spinstands and ServoTests and Measurements Miscellaneous Operating system Supported WITE32 version Chapter Support of Microsoft Windows XP Operating SystemChapter Known Issues

WITE32 specifications

The Canon WITE32 is a powerful, compact, and versatile device designed to enhance productivity and creativity in various industries, particularly in photography, printing, and imaging. With its innovative features and cutting-edge technologies, the WITE32 caters to both professionals and enthusiasts, making it an essential tool for creative projects.

One of the standout characteristics of the Canon WITE32 is its high-resolution imaging capabilities. The device boasts a sensor that captures stunningly detailed images, enabling users to produce vibrant prints and high-quality digital content. This resolution allows for large-format prints without sacrificing image clarity, which is crucial for professionals who demand precision in their work.

The WITE32 incorporates advanced connectivity options, making it easy to integrate into any workflow. With built-in Wi-Fi and Bluetooth capabilities, users can wirelessly transfer files and images from their smartphones, tablets, or computers. This feature eliminates the need for cumbersome cables and enables seamless collaboration among team members, enhancing overall efficiency.

In terms of printing technology, the Canon WITE32 utilizes a sophisticated inkjet system that produces rich colors and sharp details. It supports a variety of media types and sizes, from glossy photo paper to matte presentation materials. This versatility allows users to choose the best medium for their specific projects, further elevating the final output quality.

Moreover, the WITE32 is equipped with user-friendly software that streamlines the editing and printing process. The accompanying software suite offers a range of tools for editing images, managing print jobs, and customizing settings. Users can easily adjust color profiles, crop images, and apply filters, giving them complete control over their projects.

Another noteworthy feature is the device's compact design, which makes it ideal for smaller workspaces or on-the-go use. Despite its size, the WITE32 does not compromise on performance, proving to be a reliable option for busy professionals who require efficiency without sacrificing quality.

In conclusion, the Canon WITE32 stands out as a robust imaging device that combines high-resolution capabilities, versatile connectivity, advanced printing technology, and a compact design. Its features make it suitable for a wide range of applications, from professional printing to photo editing, making it a valuable asset for anyone looking to elevate their creative endeavors. Whether for personal use or as part of a professional toolkit, the Canon WITE32 is a key player in the modern imaging landscape.
Top Page Image Contents