Chapter Fixed Bugs, V2002 Spinstand

WITE32 Release Notes Version 3.11

CHAPTER 3 FIXED BUGS

The following bugs were discovered in WITE32 version 3.10 or earlier, and	fixed in WITE32
version 3.11. The description below explains the bug behavior as it appears in WITE32 version	3.10.

3.1V2002 Spinstand

1.The XY Alignment test may fail with the "Servo amplifier is not calibrated - signal is too low" error message.

2.The XY Alignment and the Head Alignment tests fail in the case of low frequency heads (the heads with data rates below 160 Mbit/s).

3.The XY Alignment test resets the loading radius to the default value in the Product Configuration dialog box.

4.The Y-limit Screw Adjustment test fails (shows unreachable destination position) if non-zero Head Base Parameters are specified in the Product Configuration dialog box.

5.The Product Parameters specified in V2002.DDT in Inches are different from parameters shown in Edit Product Parameters dialog by 0.002%. As a result the parameters loaded into spinstand are different from parameters specified in DDT file by 0.002%.

6.Impossible to use the Special Disk Type setting in the Product Parameters dialog box of the V2002 Spinstand Alignment Program, because the Minimum Radius and Maximum Radius values are not stored in the product database.

7.After performing the Y-limit Adjustment there is no software validation of Y-stage positioning and the Y-limit screw can be hit. In the new version of WITE32, the software always checks if the destination position is reachable before the Y-stage starts moving such that the Y-stage does not hit the screw and the warning message is shown when the specified destination position is out of range.

8.The value of the Reset Radius in the Product Parameters dialog box is different after performing XY Alignment with zero and non-zero head geometry parameters specified in the Product Parameters dialog box.

9.The V2002 Balancing procedure for the Custom 6 Screws and Custom 3 Screws choices from the Type dropdown list of the Balancing Parameters frame instructs to adjust screws for counter-clockwise balancing screw numeration instead of clockwise balancing screw numeration.

10.Cartridge, which is incorrectly installed on V2002 spinstand could hit the media or spindle. The sequence of starting the device is modified such that the spinstand checks that the required level of vacuum is provided to the cartridge before the X and Y motors start moving the V2002 head loader to the loading location. If the vacuum does not reach the required level due to improperly installed cartridge, the spinstand will not move and will provide an error message.

11.The V2002 Balancing while executed for rotation speeds higher then 10000 RPM consists of 4 stages in the case of high imbalance:

•Screw Calibration for reduced RPM,

•Balancing for reduced RPM,

•Screw Calibration for full RPM,

•Balancing for full RPM.

In WITE32 version 3.10 the Screw Calibration for full RPM shows the wrong instruction to "Switch to Balancing Tab to perform Balancing procedure" instead of instruction to continue with screw calibration.

Guzik Technical Enterprises

WITE32 specifications

The Canon WITE32 is a powerful, compact, and versatile device designed to enhance productivity and creativity in various industries, particularly in photography, printing, and imaging. With its innovative features and cutting-edge technologies, the WITE32 caters to both professionals and enthusiasts, making it an essential tool for creative projects.

One of the standout characteristics of the Canon WITE32 is its high-resolution imaging capabilities. The device boasts a sensor that captures stunningly detailed images, enabling users to produce vibrant prints and high-quality digital content. This resolution allows for large-format prints without sacrificing image clarity, which is crucial for professionals who demand precision in their work.

The WITE32 incorporates advanced connectivity options, making it easy to integrate into any workflow. With built-in Wi-Fi and Bluetooth capabilities, users can wirelessly transfer files and images from their smartphones, tablets, or computers. This feature eliminates the need for cumbersome cables and enables seamless collaboration among team members, enhancing overall efficiency.

In terms of printing technology, the Canon WITE32 utilizes a sophisticated inkjet system that produces rich colors and sharp details. It supports a variety of media types and sizes, from glossy photo paper to matte presentation materials. This versatility allows users to choose the best medium for their specific projects, further elevating the final output quality.

Moreover, the WITE32 is equipped with user-friendly software that streamlines the editing and printing process. The accompanying software suite offers a range of tools for editing images, managing print jobs, and customizing settings. Users can easily adjust color profiles, crop images, and apply filters, giving them complete control over their projects.

Another noteworthy feature is the device's compact design, which makes it ideal for smaller workspaces or on-the-go use. Despite its size, the WITE32 does not compromise on performance, proving to be a reliable option for busy professionals who require efficiency without sacrificing quality.

In conclusion, the Canon WITE32 stands out as a robust imaging device that combines high-resolution capabilities, versatile connectivity, advanced printing technology, and a compact design. Its features make it suitable for a wide range of applications, from professional printing to photo editing, making it a valuable asset for anyone looking to elevate their creative endeavors. Whether for personal use or as part of a professional toolkit, the Canon WITE32 is a key player in the modern imaging landscape.