English
Replacement Parts and Accessories
Furnished Accessories
Microphone Stand Adapter (UR2) | WA371 |
Zipper Bag (UR1) | 26A13 |
|
|
Zipper Bag (UR2) | 26A14 |
Antenna Extension Cables (2) | 95A9023 |
|
|
Hardware Kit, Locking Connector | WA340 |
Antenna (UR1), | UA710 |
|
|
Antenna (UR1), | UA720 |
Antenna (UR1), | UA730 |
|
|
Two Antennas (UR4), Band | UA820 |
Dependent (see table) |
|
Transmitter Carrying Case | 95A9053 |
|
|
Optional Accessories
SM58 Head with Grille | RPW112 |
SM86 Head with Grille | RPW114 |
|
|
BETA 58 Head with Grille | RPW118 |
BETA 87A Head with Grille | RPW120 |
|
|
BETA 87C Head with Grille | RPW122 |
SM87A Head with Grille | RPW116 |
|
|
KSM9/SL Head with Grille | RPW180 |
KSM9/BK Head with Grille | RPW184 |
|
|
Matte Silver Grille (SM58) | RK143G |
Matte Silver Grille (SM86) | RPM266 |
|
|
Matte Silver Grille (BETA 58) | RK265G |
Black Grille (SM87) | RK214G |
|
|
Matte Silver Grille (BETA 87A) | RK312 |
Matte Silver Grille (BETA 87C) | RK312 |
|
|
Black Grille (BETA 58) | RK323G |
Black Grille (BETA 87A/BETA 87C) | RK324G |
|
|
Popper Stopper Windscreen | A85WS |
Belt Clip | 44A8031 |
|
|
WA580B | |
WA580W | |
|
|
Antenna Combiners and Accessories
•Antennas and receivers must be from the same frequency band.
•The supplied 1/2 wave antennas can be remotely mounted or mounted directly to the UA845.
•Antennas and cables for use with the UA845 can also be used with
Passive Antenna/Splitter Combiner Kit | UA221 |
(recommended for 2 receivers) |
|
UHF Antenna Power Distribution Amplifier | UA845- |
(recommended for 3 or more receivers) |
|
U.S.A. | UA845US |
Europe | UA845E |
|
|
UK | UA845UK |
1/2 Wave, Omnidirectional, Wideband | UA860WB |
Antenna |
|
Active Directional Wideband Antenna | UA870WB |
Wideband | UA830WB |
|
|
Passive Unidirectional Wideband Antenna | PA805WB |
1/2 wave antennas (2) |
|
|
|
H4E, H4 Bands | UA820H4 |
J5E, J5 Bands | UA820J |
|
|
L3E, L3 Bands | UA820L3 |
Q5, Q6, Q10 Bands | UA820Q |
|
|
R9, ABJ Bands | UA820A |
25’ Antenna Cable | UA825 |
|
|
50’ Antenna Cable | UA850 |
100’ Antenna Cable | UA8100 |
|
|
Architects' and Engineers' Specifications
The wireless system shall operate in the UHF band between 518 MHz and 865 MHz, with the specific range being dependent on the user's locale. The system shall include the option of changing the operating frequency in order to avoid RF interference, enabling up to 108 systems to operate simultaneously in the same location. Preconfigured group, channel and frequency setups shall be available to ensure that multiple systems in use do not interfere with one another.
All transmitters shall be powered by 2 AA batteries and shall have a power on/off switch. The bodypack will have an LED indicating that power is on. Available transmitters shall include: a body pack for use with electric guitars, basses, and other electric instruments, and a handheld microphone for vocals. The transmitters shall have a DC/DC converter to ensure consistent performance, even if bat- tery voltages change.
The receiver shall have a
locked/unlocked status. The system shall use technology such as MARCAD≤ signal combining circuitry to improve reception, minimize signal dropouts, and achieve the best possible
The system shall be the Shure
19