Canon MVX330i, MVX300  Cancel Printing,  Printing Errors,  When you have finished printing

Page 122

Cancel Printing

Press the SET dial during printing. A confirmation dialog appears. Select [OK] and press the SET dial.

-Canon Printer: Printing stops even if it is incomplete and the paper is fed through.

-Canon CP-Printer CP-10/CP-100: A print in progress cannot be stopped. Printing stops when the current print is finished, and the remaining prints are canceled.

Printing Errors

If an error occurs during the printing process, an error message appears ( 142).

-Canon Printer: Resolve the error. When printing does not resume automatically, select [CONTINUE] and press the SET dial. If [CONTINUE] cannot be selected, select [STOP], press the SET dial and retry printing. Refer also to the printer manual for details.

-Canon CP-Printer CP-10/CP-100: Select [STOP] or [RESUME] and press the SET dial. (The [RESUME] setting may not appear with some error messages. In that case, select [STOP].) Refer also to the printer manual for details.

-If the error still persists and printing does not restart, follow below procedure:

1.Disconnect the cable.

2.Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).

3.Reconnect the cable.

When you have finished printing:

1. Disconnect the cable from the camcorder and printer.

2. Turn off the camcorder.

122

Page 121 Page 123
Image 122
Page 121 Page 123
Contents Digital Video Camcorder Digital Video SoftwareImportant Usage Instructions CA-570 identification plate is located on the bottomOperating Mode Power Switch TAPE/CARD Switch Using this ManualSymbols and References Used in This Manual About the Operating ModesTable of contents System Diagram Availability differs from area to area Recording Panoramic Images Stitch Assist ModeAbout the Network Mode DV Messenger Version2 Optional AccessoriesChecking Supplied Accessories PC-A10 Scart IFC-300PCU USBComponents Guide MVX350i/MVX330i/MVX300OPEN/EJECT Introduction Wireless Controller WL-D85 SlowCharging the Battery Pack Preparing the Power SupplyAttaching the Battery Pack Remove the battery pack after useUsing a Household Power Source Max. Recording Time  Charging, Recording and Playback TimesNB-2L BP-2L12 BP-2L14 Charging Time Typical Recording TimeOpen the cassette compartment Cover Slide the OPEN/EJECT switchLoading/Unloading a Cassette Load/unload the cassetteInstalling the Backup Battery Attaching the Lens Cap Adjusting the Viewfinder Dioptric AdjustmentPreparing the Camcorder Fastening the Grip BeltScrew the wide attachment fully into the lens filter thread Attaching the Shoulder StrapMounting the Wide Attachment SS-900 Shoulder strapUsing the Wireless Controller Inserting the BatteryLCD Backlight Adjusting the LCD ScreenRotating the LCD Screen Press the Open button and open LCD panel 90 degreesSetting the Date and Time Setting the Time Zone, Date and TimeSetting the Time Zone/Daylight Saving Time Menu System ZONE/DSTPARISLondon Menu Display Setup Displayoff Displaying Date and Time during RecordingRecording Remove the lens cap Set the camcorder to Camera modeRecording Movies on a Tape Before You Begin RecordingPage Menu Display Setup Allowing the Subject to Monitor the LCD ScreenScreen Displays during Recording Press and release the record review button Reviewing and Searching when RecordingRecord Review Record SearchCamcorder is equipped with optical zoom and digital zoom ZoomingOptical Zoom Menu Camera Setup Digital ZoomLie on your elbow Kneel on one knee Tips for Making Better VideosLean against a wall Playing Back a Tape Set the camcorder to Play VCR modeSet the Power switch to Play VCR TAPE/CARD switch to Special Playback Modes Adjusting the Volume Adjusting the VolumeWhen Using Headphones TVs with Scart Terminal Menu VCR Setup AV/PHONES AVPlaying Back on a TV Screen TVs with Audio/Video Terminals Menu Audio Setup Output CHL/R Selecting the Audio Output ChannelMenus and Settings Selecting Menus and SettingsSubmenu Menu Item Setting Options Menu and Default SettingsDefault settings are shown in boldface Camera MenuDate Format Demo Mode ON, OFF System WL.REMOTE Beep ZONE/DST RESET, Continuous Play VCR MenuSystem WL.REMOTE ON, OFF Beep ZONE/DST Card Camera Menu NIGHT+Submenu Menu Item Setting Options Card Play Menu Use this mode to record in dimly lit places Using the Recording ProgramsUse this mode to record spotlit scenes or fireworks Easy Recording ProgramSet the program selector to Easy Availability of Functions in Each ModeSelecting the Easy Recording Program Easy appearsSet the program selector to Press the SET dial Selecting the Program AE ModeSelect a mode and press the SET dial List of the program AE modes appearsMenu Using the Night ModesNight Mode NIGHT+ Set the program selector toSet the program selector to Press the Night Mode button Menu Camera Setup Skin Detailnormal Skin Detail FunctionTurn the SET dial to adjust the brightness of the image Adjusting Exposure ManuallyExposure Adjustment Exposure LockTurn the SET dial to adjust the focus Adjusting the Focus ManuallySet the program selector to Adjust the zoom Press the Focus buttonInfinity Focus Setting the White Balance White BAL.AUTORecording Camera Mode Card Camera Mode Setting the Shutter SpeedMenu Camera Setup Shutterauto Close the menuAuto Slow Shutter Menu Camera Setup SL ShutteronOnly when the flash mode is set to flash off Press the start/stop button Using the Self-TimerMenu Camera Setup Self Timeroff AppearsChanging the Recording Mode SP/LP Menu Audio Setup Changing the Audio ModeUsing Headphones during Recording Audio RecordingRecording with an External Microphone Menu Audio Setup Wind ScreenautoWind Screen Long microphones may appear on the screenZigzag Zigzag Beam Beam Tide Tide Using Digital EffectsBegin or end scenes with a fade to or from black Mosaic Mosaic Ball Ball Cube Cube Wave Wave Color Mask Color SequencesSelecting a Fader Availability of Digital Effects by Operating ModesPress the D.EFFECTS button Selecting an Effect in Card Camera ModeSelecting an Effect Name of the selected effect flashesMulti-image screen is recorded on the tape Using the Multi-Image ScreenMULTI-S flashes About the multi-image screen Widescreen TV Recording Press the Widescreen buttonSelect the magnified area with the SET dial Magnifying the ImageMove the zoom lever toward T Playback image can be magnified up to 5 timesDisplaying the Data Code Menu Display Setup Time SEL.DATE & TimeMenu Display Setup Data CODEDATE/TIME Selecting the Date/Time Display CombinationSix-Second Auto Date Menu Display Setup 6SEC.DATEOFFDisplaying the Data Code Press the Data Code buttonEnd Search Stop mode, press the END Search buttonAppears To cancel, press the Zero SET Memory button again When you have finished playback, rewind the tapeThis function is operated with the wireless controller Returning to a Pre-marked PositionDate Search Press the or button to begin searchingCustomizing the Camcorder Changing the My Camera SettingsSelect a setting option and close the menu  You can also create original start-up imagesChanging the Date Format Menu Display Setup Language EnglishChanging the Display Language Language Set a Language Set BBeep Other Camcorder SettingsAdjusting the Brightness of the LCD Screen Turning the Remote Sensor OffTurning Off the Image Stabilizer Demonstration ModeMenu Display Setup Demo Modeon Connecting a Digital Video Device Connecting the DevicesConnecting a VCR If you are connecting via AV terminal, check the settingPage Press the button to stop recording Recording from Analog Video Devices VCR, TV or CamcorderConnect the camcorder to the analog video device Connected device Stop playbackMake sure that AV DV is set to OFF Recording from Digital Video Devices DV DubbingConnect the camcorder to the digital video device Concerning Copyright Copyright PrecautionCopyright Signals Video  Headphones cannot be used during analog-digital conversion Turning On the Analog-Digital ConverterAudio Dubbing ConnectingMenu Audio Setup Audio DUB.AUDIO DubbingAudio device Stop playback Press the Audio DUB. button on the wireless controllerAudio DUB. and appear Playing Back the Added Sound Transferring Video Recordings to a Computer IEEE1394 Removing the Card Inserting and Removing a Memory CardInserting the Card Turn off the camcorderChanging the Still Image Size Selecting the Image Quality/SizeChanging the Still Image Quality You can choose from Superfine, Fine and NormalMenu Card Setup Changing the Movie SizeFile Numbers ExamplePress the Photo button halfway Set the camcorder to Card Camera modeRecording Still Images on a Memory Card Press the Photo button fullyScreen Displays during Still Image Recording Menu Camera Setup Still I.RECOFF Recording from a Tape in the CamcorderRecording from Other Video Devices Recording with Flash Using the FlashSelecting the Flash Mode Press the flash button About the AF-Assist Lamp Reviewing a Still Image Right after Recording Recording Motion Jpeg Movies on a Memory Card Press the start/stop button to stop recordingIndicates the recording time of the movie Screen Displays during Movie RecordingMovie recording time Indicates the movie size103 Turn the SET dial to select the focusing point Selecting the Focusing PointTurning Off the Focus-Priority Mode Menu Camera Setup Focus PRI.ONSetting changes with each press of the button Selecting the Drive ModeChanging the Drive Mode Continuous Shooting/High-Speed Continuous ShootingMaximum number of continuous shots at one time Auto Exposure BracketingPress the Photo button Select the program AE mode and zoom on the subject Recording Panoramic Images Stitch Assist ModeWhen Recording in Stitch Assist Mode Press the Photo button to record the first imagePress the button after the last image Playing Back a Memory Card Card Jump Function Slide ShowIndex Screen Select Protect Protecting ImagesProtecting during Index Screen Display Select Return to close the menuErasing a Single Image/All Images Erasing ImagesErasing a Single Image Menu Card Operations Image EraseMix level adjustment blue area of the live video recording Combining Images Card MixSelecting the Card Mix Effect Menu Effect Setup Card MIXMix level adjustment blue area of the card animation image Card mix menu appearsCard MIX flashes Sample ImagesPress the Card MIX button 116 Open the menu and select Card Operations Select Format Formatting a Memory CardMenu Card Operations Format Select ExecuteSET this AS START-UP IMAGE?, YES and no appears Creating a Start-up ImageMenu MY Camera Create START-UP Image Overwrite MY IMAGE?, no and YES appearsConnecting the Printer to the Camcorder Printing Still ImagesPrinting with the Print/Share Button Printing after Selecting the Print Settings Print setting menu appears When you have finished printing  Cancel Printing Printing Errors Selecting the Number of Copies Selecting the Print SettingsSetting the Print Style Select the paper size of the paper set in your printer Select the paper type of the paper set in your printerUser Guide Setting the Print Effect Image OptimizeCard #1*, Card #2*, Card #3*, LTR, A4 Prints right to the edgesPrints 1 still image per Prints 8 copies of the same still image on oneSelecting the Image Style Move the trimming frame Trimming SettingsChange the size of the trimming frame Trimming frame appearsPrint Order Printing with Print Order SettingsSelecting Still Images for Printing Print Order Up to 6 images appear Select the image you wish to printMenu Card Operations Print Orders ALL Erase PrintingErasing All Print Orders Menu PrintTransferring Memory Card Images to a Computer Direct Transfer PreparationsTransferring a Selected Image Transferring a Still Image as Wallpaper134 Transfer Order Selecting in Index Screen DisplayErasing All Transfer Orders Select TRANS.ORDERS ALL EraseStart DV Messenger About the Network Mode DV Messenger Version2Network Mode appears on the camcorder screen Hiding/Showing the Displays on the TV Screen Screen DisplaysHiding the Displays on the LCD Screen Screen Displays during Recording/Playback Camera Mode see alsoPlay VCR Mode Card Camera Mode see also Card Play ModeMessage Explanation List of MessagesMemory Card Related Messages 141 Paper Error Direct Print Related Messages143 Maintenance/Others Camcorder Handling PrecautionsVideo Heads How to avoid condensationWhen condensation is detected CondensationTreat the battery pack with care Battery Pack Handling PrecautionsAbout the battery terminal cover Resuming useExplosion CR2025 Lithium Button Battery Handling PrecautionsCassette Handling Precautions Memory Card Handling Precautions Protecting Tapes from Accidental ErasurePlayback on a TV Screen Using the Camcorder AbroadPower Sources Problem Cause Solution TroubleshootingPower Source Recording/Playback151 Editing TapeMemory Card Operation PrintingSystem Diagram Availability differs from area to area CB-2LTECB-2LTE Battery Charger Optional AccessoriesBattery Packs CBC-NB2 Car Battery ChargerFS-34U Filter Set VL-10Li Battery Video LightWD-H34 Wide-converter WS-20 Wrist StrapMemory Card SpecificationsSystem Power/Others CA-570 Compact Power AdapterNB-2LH Battery Pack SDC-8M SD Memory CardGrip belt Headphones IndexOperating Mode Output channel USB terminalMemo Memo Canon INC
Related manuals
Manual 8 pages 19.47 Kb

MVX350i, MVX330i, MVX300 specifications

The Canon MVX300 and MVX40 are two compact camcorders that exemplify Canon's commitment to delivering high-quality imaging technologies in a user-friendly package. Released in the early 2000s, these models captured the attention of both amateur and professional videographers looking for portable solutions that didn’t compromise on quality.

The Canon MVX300 boasts a robust set of features that cater to users seeking enhanced video capabilities. One notable aspect is its 3 CCD sensor technology, which allows for superior color reproduction and clearer images. This technology captures more light, resulting in vibrant and true-to-life colors, making it an ideal choice for outdoor and indoor shooting alike. The camcorder supports a resolution of 800,000 pixels, producing clear video even in challenging lighting conditions.

Another highlight of the MVX300 is its 10x optical zoom lens. This feature enables users to capture distant subjects with remarkable detail, while the digital zoom extends this capability further, allowing for up to 100x zoom. With the optical image stabilization feature, shaky footage becomes a thing of the past, ensuring smooth and steady shots even during extended recording sessions.

On the other hand, the Canon MVX40 is designed with an emphasis on ease of use and portability. It shares many similarities with the MVX300, including the stunning 3CCD sensor technology that offers excellent imaging quality. Additionally, the MVX40 includes a 16:9 widescreen recording option, catering to the growing demand for widescreen video content that enhances the viewing experience on modern televisions.

Both camcorders feature a user-friendly interface, making them accessible to users with varying levels of experience. They include a built-in flash for low-light scenarios and several automatic shooting modes to assist novice users in capturing the best footage without extensive manual adjustments.

Furthermore, the Canon MVX series is equipped with various connectivity options, including USB and FireWire ports, which facilitate seamless transfer of video files to computers for editing and sharing.

In summary, the Canon MVX300 and MVX40 serve as excellent examples of mid-range camcorders that blend technological sophistication with user-centric design. Their 3CCD technology, optical zoom capabilities, and intuitive features make them a suitable choice for anyone looking to create high-quality video content without the need for professional-grade equipment. Whether for family gatherings, travel memories, or creative projects, these camcorders stand out as capable companions for capturing life’s moments.
Top Page Image Contents