Alesis Stereo Amplifier manual Bypass, Input Left/Mono & Right, Output Left & Right

Page 26

Chapter 4 – Description of Controls

This is a plug for connecting the Alesis Model P3 9VAC power supply (supplied). The power supply included with the NanoVerb is compatible with the electrical requirements of the country of purchase, and should be connected to the proper electrical outlet. (In the USA, this is 120VAC.) The correct power supply must be used AT ALL TIMES. Any other power supply might create a fire risk and/or permanently damage your unit. This damage would NOT be covered under your warranty.

Bypass

This is a 1/4" phone jack which connects to a momentary (not latching) footswitch, either normally-open or normally-closed. When the Footswitch is pressed, the NanoVerb will stop producing effects and only the dry signal will pass through the unit. If the Footswitch is pressed again, effects output will continue.

Input (Left/Mono & Right)

These are 1/4" unbalanced phone jacks which connect to sources such as the effects sends of mixing consoles. They may be used with nominal input levels from -20dBV (guitar level) to +4dBu. For mono applications, use the [LEFT/MONO] input.

The [LEFT/MONO] input jack is normalled to the [RIGHT] jack. This means that when nothing is plugged into the [RIGHT] input jack, the signal present at the [LEFT/MONO] input is routed to the [RIGHT] as well.

Output (Left & Right)

These are 1/4" unbalanced phone jacks which connect to devices such as the effects returns on a mixing console or power amplifier inputs. For mono applications, use the [LEFT] output.

26

NanoVerb Reference Manual

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Alesis Conventions How To Use This ManualIntroduction NanoVerb Reference Manual Contents Troubleshooting Contents NanoVerb Reference Manual Unpacking and Inspection Powering UpYour First Session with Nanoverb Basic ConnectionsSetting Levels What’s on the Front Panel?Editing Programs Adjusting Effects Mix LevelsAuditioning Programs Bypassing EffectsPlacement and Installation Rack MountingAudio Connections AC Power HookupConnections Line Conditioners and ProtectorsInput Jack Wiring Typical ApplicationsFrom Instrument or Effects Send Using Aux Sends and Returns Interfacing to a Mixing ConsoleHow to Set Aux Send and Return Levels on the Mixer Using Inserts Using Main Outputs Using the NanoVerb with a Powered Mixer Avoiding Ground Loops ¬ to Eliminate HUM if the Above has FailedFootswitch Concert Hall 3 Programs Overview of ProgramsReverb Effects Real Room 3 ProgramsNonlinear 1 Program Reverb Parameter AdjustPitch Based Effects 5 Programs DecayLFO Delay 1 Program Pitch-Based Parameter AdjustDelay Parameter Adjust TimeRear Panel Description of ControlsFront Panel Output Left & Right BypassInput Left/Mono & Right Maintenance/Service TroubleshootingTroubleshooting Index Customers outside the USA and Canada Specifications Electrical

Stereo Amplifier specifications

The Alesis Stereo Amplifier stands out in the crowded audio market by offering a balance of power, performance, and practicality that appeals to both audiophiles and casual listeners alike. With its sleek design and robust construction, this amplifier is engineered to deliver high-quality sound reproduction, making it an ideal choice for home audio systems, studios, and even live sound applications.

One of the primary features of the Alesis Stereo Amplifier is its impressive power output. With a rating of 100 watts per channel at 8 ohms, the amplifier provides ample headroom for driving a variety of speakers. This means listeners can enjoy crystal-clear audio without distortion, even at higher volumes. The unit is also compatible with a range of speaker impedances, which adds to its versatility in different setups.

The amplifier utilizes advanced Class AB technology, which combines the efficiency of Class B with the sound quality of Class A. This design helps minimize heat generation while maintaining high fidelity, ensuring that the amplifier operates efficiently over extended periods. The result is a dynamic audio experience with rich lows, smooth mids, and sparkling highs.

Another notable characteristic of the Alesis Stereo Amplifier is its user-friendly interface. Equipped with a front-panel volume knob and input selectors, users can easily adjust settings to suit their listening preferences. The amplifier supports multiple input sources, making it convenient for users to connect devices such as CD players, turntables, and computers.

For those concerned about connectivity, the Alesis Stereo Amplifier offers a selection of input options, including RCA and 1/4-inch TRS inputs, which allow for seamless integration with a wide range of audio equipment. Additionally, it features speaker binding posts for secure connections and compatibility with banana plugs, ensuring a stable and reliable performance.

In terms of build quality, the Alesis Stereo Amplifier is designed with durability in mind. Its rugged chassis is built to withstand the rigors of both studio and stage environments. The amplifier also incorporates intelligent thermal management systems, which protect the internal components from overheating, thereby prolonging the life of the unit.

Overall, the Alesis Stereo Amplifier delivers a compelling combination of power, versatility, and user-friendly features, making it an excellent choice for anyone looking to enhance their audio experience. Whether for personal enjoyment or professional use, this amplifier is well-equipped to meet the demands of today’s audio landscape.
Top Page Image Contents